Loading ...
Loading ...
Loading ...
31
JA13 Offline Schedule Setting & Battery Replacement
Front Cover
BR2032 Battery
Control Board Assembly
Before uploading and enabling JA13
offline schedule (Utility Contractor
Only):
1. Power ON Water Heater.
2. Press, hold for 5 seconds and release the
WiFi button.
3. WiFi LED will start to blink when it is ready
to start WiFi setup.
4. WiFi signal will start to broadcast for
30 minutes and user can use the EcoNet
Contractor Portal and Contractor Application
to setup JA13 Offline Schedule.
5. If setup is not completed in the next 30
minutes, WiFi will stop broadcasting. User
should go to these steps again to re-start WiFi
setup.
6. Once setup is completed, the Demand
Response Icon will light up which will
indicate the Water Heater is following a
schedule.
To override JA13 offline schedule:
1. The user can override the JA13 offline
schedule for 72 hrs by pressing the MODE
button and changing the Mode of operation
of the water heater to the user desired Mode
and set-point.
2. Once the user override Time elapses, the
Demand Response will continue to follow
the predetermined schedule.
3. To completely opt-out from JA13 scheduling,
contact your utility company.
To replace the battery follow these
steps:
1. Remove the front cover of the Control
assembly.
2. Remove the BR2032 battery from the battery
holder.
3. Replace the battery with an approved
BR2032 cell coin battery.
4. Re-Install the front cover of the Control
assembly.
Loading ...
Loading ...
Loading ...