Loading ...
Loading ...
Loading ...
6
NOTE
Your appliance may have some, or all of the
features listed below. Become familiar with
these features, and their use and care.
SETTING THE
TEMPERATURE CONTROL
Cool Down Period
For safe food storage, allow 4 hours for the unit
to cool down completely. The appliance will run
continuously for the rst several hours. Foods that
are already frozen may be placed in the freezer
after the rst few hours of operation. Unfrozen
foods should NOT be loaded into the freezer until
freezer has operated for four (4) hours.
When loading freezer, freeze only three (3)
pounds of fresh food per cubic foot of freezer
space at one time. Distribute packages to be
frozen evenly throughout the freezer. It is not
necessary to turn the control knob to a colder
setting while freezing food.
Door Removal
If door must be removed, unplug the unit.
1. Gently lay appliance on its back, on a
rug or blanket.
2. Remove 2 base screws and base panel.
3. Remove wire from clips on bottom of
cabinet if required.
4. Unplug connector, if required, by holding
the cabinet connector in place, and
pulling door connector out. If equipped,
pull Harness Retainer from Cabinet.
5. Remove 4 bottom hinge screws.
6. Remove plastic top hinge cover.
7. Remove 2 screws from top hinge.
8. Remove top hinge from cabinet.
9. Remove door and bottom hinge
from cabinet.
10. To replace door, reverse the above
order and securely tighten all screws to
prevent hinge slippage. Harness must be
routed as shown in gure.
FIRST STEPS
Temperature Control
Electromechanical Temperature Control
(some models)
• Converting Between Refrigerator
and Freezer:
The convertible model can operate as
either a freezer or a refrigerator. The
electromechanical temperature control
provides this adjustment and is located inside
the appliance. The temperature is factory
preset to provide satisfactory food storage
temperatures. However, the temperature
control is adjustable to provide a range of
temperatures for your personal satisfaction.
OPTIONAL FEATURES
Base Screw
Hinge
Screws
Wire
Door
Connector
Cabinet
Connector
Harness
Restraint
All Freezer or All Refrigerator
Change Modes to Fit Your Needs
STEP 1: Locate the temperature control knob
at the bottom of the interior back wall.
STEP 2: Turn the knob to the area marked
“freezer” or “refrigerator” to select
your desired mode.
Loading ...
Loading ...
Loading ...