Loading ...
Loading ...
Loading ...
Installation and planning notes
PW 811 / PW 814 / PW 818 5
Installation
This washing machine must be transported to its installation site us-
ing a suitable pallet jack. Remove the transport packaging.
The washing machine must be set up on a level and firm surface with
the minimum stated load bearing capacity (see "Technical data").
The floor load created by the washing machine is concentrated and
transferred to the installation footprint via the machine feet.
Tip: A concrete floor is the most suitable installation surface for this
machine, being far less prone to vibration during the spin cycle than
wooden floorboards or a carpeted surface.
The washing machine requires a gap of at least 2" (50mm) on each
side to allow for movement during operation. To ensure suitable ac-
cess for further maintenance and service work, please ensure a mini-
mum distance of 16" (400mm) is maintained between the back of the
machine and the wall.
Installation on
concrete base
The washing machine can be installed on a concrete base if desired.
The concrete materials and the durability of the concrete base must
be assessed in accordance with the floor load bearing capacity
given in "Technical data".
To guarantee the stability of the washing machine, make sure that
the concrete base is sufficiently stable on the floor and that it is ca-
pable of withstanding any burden or force from the washing ma-
chine.
The washing machine must be secured to the concrete base using
the fixtures and fastenings supplied.
The washing machine must be secured to the base immediately
after installation!
There is a risk of the washing machine falling off a raised base dur-
ing a spin cycle if it is not secured.
Loading ...
Loading ...
Loading ...