Loading ...
Loading ...
Loading ...
Installation and planning notes
PW 811 / PW 814 / PW 818 15
Optional accessories
Only use genuine Miele spare parts and accessories with this ma-
chine.
Using spare parts or accessories from other manufacturers will
void the warranty, and Miele cannot accept liability.
XKM RS232 com-
munication mod-
ule
The serial interface RS-232 can be retrofitted to the washing machine
via an XKMRS232 (optional accessory available from Miele). This
communication module must only be used with MieleProfes-
sionalmachines that are fitted with an appropriate slot for the mod-
ule.
The data interface provided via communication module
XKMRS232 complies with SELV (Safety Extra Low Voltage) in ac-
cordance with EN60950.
Machines connected to this interface must also be SELV compliant.
Communication module XKMRS232 is supplied with a connection
cable and a D-sub-connector.
Base
The machine can be installed on a machine base (open or box base,
available as an optional Miele accessory).
Elevating the washing machine gives a better ergonomic working
position when loading or unloading. It also simplifies the installation
of a waste water connection.
When installed on a raised base, the machine must be secured
to the base and the base must be secured to the floor.
There is a risk of the washing machine falling off a raised base dur-
ing a spin cycle if it is not secured.
Weighing base
The washing machine is optionally available with a weighing base. In
this version, the actual weight of the laundry load is displayed during
loading along with the maximum laundry load weight for the unit.
Make sure that the washing machine is not in contact with objects
or people located nearby or leaning against it. They could be
weighed as well and falsify the load weight shown on the display.
Suds drain and
vapor vent (BWS)
If excessive suds form, suds may escape from the vapor vent. To
drain the suds, an optional vapor vent kit (BWS) can be installed.
Loading ...
Loading ...
Loading ...