Loading ...
Loading ...
Loading ...
GENERAL:
• Follow implicitly the engine manufacturer's recommendations for maintenance.
• Always keep your machine clean - especially the engine deck. Check all adjustments periodically. Also,
periodically check that all fasteners are secure. Remember, sharp blades cut better. Always have an extra
set on hand. After re-sharpening blades, be certain they are checked for balance. Do not use blades out of
balance. Before doing any of these, check your safety and assembly instructions.
• Never make any adjustments to the unit until the engine is off and the spark plug wire is disconnected.
• If carburetor adjustment is necessary, stand to one side and keep feet and hands in the clear while making
adjustments.
• Keep engine free of accumulations of grass, leaves or excessive grease. An accumulation of these
combustible materials may result in a fire.
• Store gasoline in a safe and approved container in a cool, dry place.
• Keep the unit and any fuel containers in locked storage to prevent children from playing and/or tampering
with them.
• Do not store gasoline powered equipment or fuel containers in a basement or any closed area where
heating or heat appliances or open pilot lights are present, unless the fuel is completely drained from the
power equipment and the fuel containers.
LUBRICA TION:
• Your mower is equipped with numerous greaseable assemblies to ensure long life and minimal wear. It is
imperative that the owner address these areas. All fittings should be lubricated using a high-performance,
automotive quality grease. See maintenance schedule below.
*LUBRICATION CHART
Qty
2
2
2
2
All
Location
Caster Wheel Pivots
Caster Wheel Bearings
Mower Spindle Bearings
Drive Wheel Bearings
Pivot Points
Daily
X
X
Weekly
X
X
X
In addition all linkage points and threaded adjustments should be oiled on a weekly schedule.
*NOTE: This maintenance is necessary to keep your warranty in effect.
GVTP SM32-R0303.1
Loading ...
Loading ...
Loading ...