Loading ...
01 CHECKING THE
COMPONENTS
Surround Speaker X 2 (Left / Right) / Power Cord X 2
NOTES
• For more information about the power supply and power
consumption, refer to the label attached to the product.
(Label: Rear of the Main Unit)
• Design and specications are subject to change without prior
notice.
02 CONNECTING THE
SWA-9500S TO A
SOUNDBAR
1. Check the standby status after plugging into
an electrical outlet
Plug the Surround Speakers power cord into an electrical outlet
and into the Surround Speakers to turn on the Surround Speakers.
The LINK LED indicator (blue LED) on the Surround Speakers blinks.
If the LED does not blink, refer to step 5.
Bottoms of the Left and Right Surround
Speakers
Blinking blue fast
Rear of the Left and Right
Surround Speakers
2. Turn off the Soundbar
Turn off the Soundbar using the Soundbar’s remote control or by
pressing the (Power) button on the main Soundbar unit.
BYE
• The image of the Soundbar may differ from your Soundbar,
depending on the model.
3. Congure “ID SET” using the Soundbar’s
remote control
Press the Up button on the Soundbar remote control for 5 seconds.
• The ID SET message appears on the Soundbar main unit’s display
for a short time and then disappears.
• After the ID SET process, the Soundbar power is automatically
turned on.
SOUND
MODE
PAIR
5 Sec
ID SET
• The image of the Soundbar may differ from your Soundbar,
depending on the model.
4. Check if the LINK LED is solid blue
(connection complete)
Stops blinking.
Glows blue.
Rear of the Left
and Right Surround
Speakers
The LINK LED indicator
stops blinking and
glows a solid blue
when a connection is
established between
the Soundbar and the
Surround Speakers.
5. If the SWA-9500S does not connect, take
the necessary steps according to the LED
Indicator’s status
LINK (Blue) On : Successfully connected (normal operation).
LINK (Blue) Blinking : Recovering the connection.
• Check if the power cable attached to the main Soundbar unit
is connected properly or wait about 5 minutes.
• Repeat steps 2 through 4.
STANDBY (Red) On :
Standby (with the Soundbar main unit turned off).
• Check if the power cable attached to the main Soundbar unit
is connected properly.
Connection failed.
• 1. Press the ID SET button on the back of the Surround
Speakers with a pen tip for 5~6 seconds until the LINK LED
indicator blinks (in Blue).
5 Sec
2. Repeat steps 2 through 4.
Red and blue Blinking : Malfunction
• See the contact information for the Samsung Service Centre
in this manual.
Installing the Surround Speakers on a
Wall (Optional)
You can purchase wall mounts separately to install the surround
speakers on a wall.
Wall mounts aren’t sold by Samsung Electronics.
Notes for Wall Mounting the Surround Speakers
• Surround Speaker wall mounts must be able to support more
than 8.0 kg.
• Hole size : 1/4 - 20 UNC threaded insert
Rear of the Left and Right Surround Speakers
– Standard Screw : 6.3 mm , 1.3 mm Pitch
– Length : 18.0 mm long
– Quantity : Left 1 EA / Right 1 EA
• Check the strength of the wall before you install the Wall Mount
Brackets. If the strength is insufcient, make sure to reinforce
the wall before installing the Wall Mount Brackets and the
speakers on the wall.
• Samsung Electronics is not liable for any damage to the product
due to the product being installed inappropriately.
• Take care not to install the speakers sideways or upside down.
03 COMPATIBLE MODELS
• Compatible with select Samsung Soundbar. Please visit the
Soundbar product page at www.samsung.com/support for more
information.
• Compatible model list is subject to change without further notice.
04 OPEN SOURCE LICENSE
NOTICE
To send inquiries and requests for questions regarding open
sources, contact Samsung Open Source
(http://opensource.samsung.com)
05 SPECIFICATIONS AND
GUIDE
Specications
Model Name
SWA-9500S
Weight
1.8 kg
Dimensions (W x H x D)
125.0 X 203.0 X 141.0 mm
Operating Temperature Range
+5°C to +35°C
Operating Humidity Range
10 % ~ 75 %
AMPLIFIER
Rated Output power
35W x 4
Frequency range
20Hz~20kHz
NOTES
• Samsung Electronics Co., Ltd reserves the right to change the
specications without notice.
• Weight and dimensions are approximate.
• For India Only
“This product is RoHS compliant”