Loading ...
Loading ...
Loading ...
4
ASSEMBLY
1. Unpack humidifier from carton. Remove manual.
2. Remove all packaging materials. Some packaging material is located under the
fan assembly. Verify the following items are in the humidifier cabinet.
CASTERS
3. Turn the emptied cabinet upside down.
4. Insert each caster stem into one of the
four caster holes manually Do not use
tools. The casters should fit snugly
and be inserted until the stem shoulder
reaches the cabinet surface.
5. Turn the cabinet right side up.
REINSTALLING COMPONENTS
NOTES ON LOCATION:
In order to get the most effective use from your humidifier, it is important to position
the unit where the most humidity is needed or where the moist air will be circulated
throughout the house such as near a cold air return. If the unit is positioned close to
a window, condensation may form on the window pane. If this occurs, the unit
should be repositioned in another location.
Place humidifier on a flat,
level surface. Do NOT
position the unit directly in
front of a hot air duct or
radiator. If placing on
carpet, use caster pads to
ensure level placement.
Due to release of cool,
moist air from the
humidifier, it is best to
direct air away from
thermostat and hot air
registers. Place the unit on
a level surface 2 inches
from the wall.
If positioning on carpet or
uneven surface, place caster
pads under front casters only
to level (if necessary).
Front of cabinet
Front caster
Caster pad
Carpet or uneven surface
♦ 2 wick assemblies with
4 wicks installed
♦ 4 casters and 2 caster pads
♦ 2 bottles ♦ 2 bottle caps and 2 valve caps
♦ Float with retainer ring ♦ Manual & registration card
NOTE: The use of a buble level will ensure
placement for proper bottle draining.
1. Reinstall float.
2. Reinstall wick assemblies
into cabinet.
3. Reinstall water bottles
Front
FRONT
FRONT
Front
FRONT
FRONT
Left
Right
Front
Float
Front
FRO
N
T
Loading ...
Loading ...
Loading ...