Loading ...
Loading ...
Loading ...
Connecting The Water Supply
Toconnect thewatersupplyto the rearof your refrigerator:
1
2
Plastic Water Tubing
to ice Maker
i iii ! iii i&
Ensure that the refrigerator is not plugged in.
Flush the supply line until water is clear by placing the end of the copper tube
in a sink or bucket and opening the shut-off valve,
3 Unscrew the plastic cap from the water valve inlet at
the rear of your refrigerator, Discard the cap,
_Jar.p 4 Slide the brass compression nut, then the ferrule
Brass (sleeve) onto copper tube.
5 Push the copper tube into water valve inlet as far as it
will go (1/4 inch),
6 Slide the ferrule (sleeve) into valve and finger-tighten
waterline the compression nut onto valve. Tighten another half
turn with a wrench. Do not over-tighten.
Water Valve
7 Secure the copper tube to your refrigerator's rear panel
with a steel clamp and screw (see illustration).
8 Coil the excess copper tubing (about 2½ turns) behind
your refrigerator as shown, Arrange coiled tubing to
avoid vibration or wear against other surfaces,
9 Open water supply shut-off valve and tighten any
connections that leak,
water line
from household water Suj
(include enough tubing in loop to allow
moving refrigerator out for cleaning,)
Loading ...
Loading ...
Loading ...