Loading ...
Loading ...
Loading ...
Service and Adjustment (cont'd)
Drain Valve Washer
Replacement
NOTE: For replacement, use a '_a" x _/." x *A"thick washer
available at your nearest hardware store. For ordering replace-
ment wnshers, refer to the "Parts Order List" section.
Turn "OFF"gas supply to water heater.
Follow "Draining" instructions.
Turning counter clockwise, remove the hex cap below the
screw handle.
Remove the washer and put the new one in phce.
Screw the handle and cap assembly back into the drain valve
and retighten using a wrench. DO NOT OVER TIGHTEN.
Follow instructions in the "Filling The Water Heater"
section.
Check for leaki.
Follow the lighting instructions in the _Lighting" section to
restart the water heater.
_ HANDLE
_" _" AND CAP
' _ ASSEMBLY
Housekeeping
Vacuum around base of water heater for dust, dirt, and lint on a
regular basis.
A WARNING
INSTALLED IN SUITABLE AREA: To insure suffi-
cient ventilation and combustion air supply, proper
clearances from the water heater must be main-
tained. See "Facts to Consider About the Location"
section. Combustible materials such as clothing,
cleaning materials, or flammable liquids, etc. must
not be placed against or adjacent to the water
heater which can cause a fire.
Service
Before calling for repair service, read the Start Up Conditions
and Operational Conditions found in the Troubleshooting
Guide of this manual.
If a condition persists or you are uncertain about the operation
of the water heater, let a qualified person check it out.
Contact SEARS Repair Services at 1-800-4-MY-HOME
(1-800-469-4663).
22
Loading ...
Loading ...
Loading ...