Loading ...
Loading ...
Loading ...
page 7
9. Blade Assembly.
Time Saver: Washers for blade screws can be set
on each blade screw prior to installing blades.
Locate 15 blade attachment screws and washers
in one of the hardware packs. Hold blade arm up
to blade and align holes. Insert 3 blade
attachment screws (along with washers) with
fingers first and then tighten screws securely
with a Phillips screwdriver. Repeat for the
remaining blades.
Remove blade arm screws and lock washers
from underside of motor. If plastic motor locks
are installed with blade arm screws, discard
plastic motor locks (save blade arm screws and
lock washers to secure blade arms). Align blade
arm holes with motor screw holes and attach
blade arm with lock washers and blade arm
screws. Before securing screws permanently,
repeat with remaining blade arms. Securely
tighten all screws.
NOTE: Tighten blade arm screws twice a year.
switch housing cap
light kit fitter
switch
housing
motor
housing
switch housing
cap
hex nut
lock washer
10. Light Kit Assembly.
Remove 3 screws from switch housing cap.
If you wish to use fan WITHOUT the light kit,
align holes in switch housing cap with holes in
switch housing. (Note: The gap on the top edge
of the switch housing cap must align with the
reverse switch on the switch housing for the
proper fit.) Secure switch housing cap with
3 screws that were just removed.
Please proceed to Section 11 on the next page to
complete installation WITHOUT the light kit.
If you wish to use fan WITH the light kit, locate
BLUE (or BLACK) and WHITE wires in switch
housing labeled LIGHT.
Remove hex nut and lock washer from threaded
rod on light kit fitter. Punch center cap out of
switch housing cap with a screwdriver. Feed
wires from light kit fitter through center hole in
switch housing cap. Then, screw switch housing
cap onto threaded rod followed by lock washer
and hex nut. Tighten hex nut over lock washer
for a secure fit.
["Light Kit Assembly" continued on next
page.]
black (or blue)
wire
blade arm
blade
blade attachment
screws and washers
lock
washers
blade arm screws
motor housing
plastic
motor lock
center cap
white wire
switch housing cap
Loading ...
Loading ...