Loading ...
Loading ...
Loading ...
UK/8
- Unscrew the thermostat lock nut (plate C);
- Remove the thermostat sensor located inside the compartment;
- Replace the thermostat (item 7 plate C) and the respective sensor.
- Perform the above operations in reverse order to reassemble.
5.4.4 REPLACING THE MAGNETIC DOOR FASTENER
After carrying out the operations described in 5.1 above, to replace the
magnetic door fastener proceed as follows:
- Open the doors of the proofer (plate C).
- Remove the seal snap ring (plate C).
- Replace the magnetic door fastener (item 15 plate C).
5.4.5 REPLACING THE THERMOSTAT DIAL AND RING
NUT
After carrying out the operations described in 5.1 above, to replace the
thermostat dial and/or relative ring nut, proceed as follows from the
outside of the compartment:
- Remove the snap-on thermostat dial (item 5 plate C).
- Unfasten the lock nut (item 6 plate C).
- Replace the lock nut and/or the dial.
5.4.6 REPLACING THE INDICATOR LIGHT AND THE
LIGHT SWITCH
After carrying out the operations described in 5.1 above, to replace the
indicator light and the light switch proceed as follows:
- Remove the control panel fixing screws (plate C).
- Disconnect the faston connectors for the indicator and/or the light
switch.
- Replace the indicator light (item 14 plate C).
- Replace the push button (item 4 plate C).
- Perform the above operations in reverse order to reassemble.
5.4.7 REPLACING THE HEATING ELEMENTS
After carrying out the operations described in 5.1 above, to replace the
heating elements proceed as follows:
- Unfasten the panel fixing screws (plate C);
- Disconnect the heating element supply wires;
- Remove the protective casing from the heating elements;
- Remove the heating elements (item 10 plate C);
- Perform the above operations in reverse order to reassemble.
6 NOISE LEVELS
This appliance is a technical instrument of work and normally, the
noise level threshold at the operator station does not exceed 70 dB (A).
7 LIST OF SPARE PARTS
Index of plates
Plate A Baking chamber assembly Amalfi
Plate B Baking chamber assembly P120E
Plate C Proofer assembly
Plate D Steamer assembly
Plate E Wiring diagram Amalfi A-B-C
Plate F Wiring diagram Amalfi D
Plate G Wiring diagram P120E A-B
Plate H Wiring diagram P120E C
Plate I Wiring diagram proofer
INSTRUCTIONS FOR ORDERING SPARE PARTS
Orders for spare parts must contain the following information:
- Appliance type
- Appliance serial number
- Name of part
- Number required
Loading ...
Loading ...
Loading ...