Loading ...
Loading ...
Loading ...
PURE CYCLE TM
Pure Cycle is a self-cleaning cycle that removes mold that may occur inside the washing machine.
1, Press the Power button.
2, Select the Pure Cycle TM course.
• Once the Pure CycleTM course is selected, the only
function that can be set is Delay Start.
3, Press the Start/Pause button.
If you press the Start/Pause button, Pure Cycle
begins.
WA456"
................................
WA422_/WA400 _
CAUTION ®
the laundry or a problem with the washing machine.
[_ The Pure Auto Indicator Function
Cycle
If the "Pure Cycle" is lit after a wash, it indicates that tub
(drum) cleaning is required. In this case, remove the laundry
from the washing machine, turn the power on, and clean
the drum by running Pure Cycle.
If you do not run Pure Cycle, the "Pure Cycle TM'' indicator
turns off. However, the "Pure Cycle TM''indicator will light
again after two washes. Not running Pure Cycle at this
point will not cause a problem with the washing machine.
Although the Pure Cycle Auto Indicator appears once a
month or so, the frequency may differ depending on the
number of times the washing machine is used.
Using Pure Cycle, you can clean the drum without using a cleansing agent.
Never use Pure Cycle when laundry is in the washing machine. This may cause damage to
WA456"
WA422" / WA400*
30 maintainng your washer
Loading ...
Loading ...
Loading ...