Loading ...
Loading ...
Loading ...
Steam en
17
`Steam
St e a m
With some heating modes, you can prepare food with
steam assistance. In addition, the Dough proving and
Reheat heating modes are available.
:Warning – Risk of scalding!
When you open the appliance door, hot steam can
escape. Steam may not be visible, depending on its
temperature. When opening, do not stand too close to
the appliance. Open the appliance door carefully. Keep
children away.
Noise
Pump
You will hear a humming noise while the pump is in
operation and after switching it off. This noise is caused
by the pump function test. It is a normal operating
noise.
Control panel
You will hear a humming or clicking noise when
opening the control panel. These noises are caused by
the control panel being pushed out. They are normal
operating noises.
VarioSteam – Steam-assisted cooking
When you cook with steam assistance, steam is
introduced into the cooking compartment at various
intervals and with varying degrees of intensity. This
gives you a better cooking result.
Your food
■ Becomes crispy on the outside
■ Develops a shiny surface
■ Is succulent and tender on the inside
■ Only undergoes a minimum reduction in volume
You set the combination of heating mode and steam
intensity that you want. Use the information in the tables
to select a suitable heating mode and steam intensity.
Alternatively, select a program from the steam
programs. ~ "Tested for you in our cooking studio"
on page 37~ "Programmes" on page 24
Steam intensity
Different intensity levels are available when adding
steam:
■ Low
■ Medium
■ High
Suitable heating modes
You can switch on steam assistance for these heating
modes:
■ CircoTherm hot air ‚
■ Top/bottom heating ƒ
■ Circo-roasting ‡
■ Bread-baking …
■ Keeping warm «
Starting
1. Touch the # touch button.
2. Refill the water tank.
3. Set the heating mode and temperature.
4. Touch the Ž touch button to switch on steam
assistance.
5. Use the & button to navigate to the line with steam
assistance Ž.
6. Use the ( or ) button to select the steam intensity.
7. Touch the # touch button.
The appliance starts the operation.
Note: If the water tank runs dry during an operation with
steam assistance, a message appears on the display
prompting you to fill up the water tank. The operation
continues without adding steam.
Cancelling steam addition
Touch the Ž touch button to cancel the addition of
steam early.
Note: The operation continues without adding steam.
Cancelling appliance operation
Press and hold the # touch button until the appliance
operation is cancelled.
Finishing
Touch the # touch button to switch the appliance off.
Dough proving setting
Dough will prove considerably more quickly using the
"Dough proving Œ" heating mode than at room
temperature and does not dry out.
There are two levels available for the Dough proving
setting. Use the information in the tables to select the
appropriate level. ~ "Tested for you in our cooking
studio" on page 37
Note: If the water tank runs dry during operation with
the Dough proving setting, operation is interrupted. Fill
the water tank.
Starting
1. Touch the # touch button.
2. Refill the water tank.
Note: Only switch on Dough proving once the
cooking compartment has completely cooled down
(to room temperature).
3. Use the ( or ) button to select "Dough proving Œ".
4. Use the & button to navigate to the next line.
5. Use the ( or ) button to select the level.
6. Use the & button to navigate to the next line.
7. Use the ( or ) button to select the cooking time.
8. Touch the # touch button.
The appliance starts the operation.
As soon as the cooking time has elapsed, an audible
signal sounds and the appliance ends the operation
automatically. Touch the 0 touch button to end the
audible signal.
Loading ...
Loading ...
Loading ...