3-Tier Burning Bowls Water and Fire Fountain
Please read instructions below before first-time use:
• Do not tip fountain as fuel can spill out and cause fire or serious injury.
• For outdoor use only.
• Fuel not included. Use torch fuel or bio ethanol fuel. Use of any other fuel will void your warranty.
• Failure to follow warnings and instructions may result in serious injury or destruction of property.
• Keep out of reach of children or pets.
• Do not leave flame unattended.
• Do not move fountain while burning. Hot while in use.
• To prevent burns and other injuries, snuff flame and allow to cool completely before handling.
• Refill flammable liquid before use, and only refill when flame area is cold. Wait at least 30 minutes before
refilling or cleaning.
• Keep clothing, hair, and body parts away from flame; may cause serious injury or burns.
• DO NOT place fountain under covered shelter or umbrella, or near other combustibles, such as, but not limited
to: wood structures, clothing, or dry vegetation.
• Use in a well-ventilated area.
• Do not spill flame fuel into water portion of fountain as that may cause damage to the fountain, pump, or
destruction of property.
Assembly:
1. Pull the end of the hose out of the bottom of the detached bowl.
Place the hose inside the large opening in the top of the fountain
then lower the detached bowl into place.
2. On the faceplate to the pump, turn the flow to “low”. Attach the
hose, found inside the fountain, to the top of the pump and set
inside the bottom of the fountain.
3. Run the power cord through the notch in the door.
4. Turn the door to lock it in place.
5. Unscrew the lids of the fuel reservoirs and carefully pour fuel into them. Do not get
water into fuel reservoirs. Replace the lid and place the fuel reservoirs into the
fountain.
Fuel not included.
Use torch fuel or bio ethanol fuel.
Use of any other fuel will void your warranty.
6. Fill bottom basin with water.
7. Light the flames (lighter not included).
8. Plug into electrical outlet.
