Loading ...
Loading ...
Loading ...
5,Thesparklingwaterconcentrationissetto'2'bydefault,
Pressthe"SparklingWater"button to set the concentration to a desired level,and then press and hold the Quick
Sparklingbutton for3 seconds to activatethe FillUp function,
If the Sparkling Water function is deactivated, press and holdthe Sparkling Water or Quick Sparklingbutton for 3
seconds to reactivateit,
Once the CO2cylinder is reset, sparklklgwater is produced,
® to produce sparkling water,the sparkling water tank is filledwith water and CO2gas is injectedaccording to the
selected concentraiion,
® to remove foreignsubstancesthat may exist inthe sparklingwater tank, discard the first quart of sparklingwater,
® The refrigeratorwill not dispense sparklingwater while it ismaking sparkling water,
When the numbers ( _ ) next to the sparkling water icorsstop blinking, you carsdispensesparklingwater,
[]
OR
Press 3 seconds
,, to uninstall a SodaStream Carbonator, follow steps #1 -_ #4 above in reverse order,
For more information about using the Sparkling Water function, see Using the Sparkling Water Function.
Completing the Set Up
Now that you have your new refrigerator installed in place, you are ready to set up and enjoy the
features and functions of the appliance.
By completing the following steps, your refrigerator should be fully operational.
1. Make sure your refrigerator is in an appropriate location with reasonable clearance between it and
the wall. Refer to installation instructions in this manual.
2. Once the refrigerator is plugged in, make sure the interior light comes on when you open the doors.
3. Set the Temperature control to the coldest temperature and wait for an hour.
The freezer will get slightly chilled and the motor will run smoothly.
Reset the refrigerator and freezer to the temperatures you want.
4. After you plug in the refrigerator, it takes a few hours to reach the appropriate temperature.
You can store food and drinks in the refrigerator after the temperature is sufficiently cool.
If condensation or water drops appears on both sides of fridge door's central part, turn the
Energy Saver mode off after removing the condensation. (See the explanation of the Energy
Saver button in USING THE CONTROL PANEL on page 23.)
Engl sh - 21
Loading ...
Loading ...
Loading ...