Loading ...
Loading ...
Loading ...
4
ADDITIONAL PROGRAMMING
The Wireless Commercial Keypad must be put into programming mode prior to any of the programming steps below unless
otherwise indicated.
Set Temporary PIN
A temporary 4-digit PIN can be programmed to allow access to visitors (maximum of 9 uses). The temporary PIN cannot be
the same as any previously programmed PIN. The keypad will store up to 10 unique temporary PINs.
Delete Permanent and Temporary PIN
Program to Linear Multi-Code Receiver
KPW250 ONLY
1. Locate the DIP switch sequence on the operator and record it. If DIP switch is in the “up” or “on” (CLOSED)position place
a 1, “down” or “off” (OPEN) position place a 0 in the corresponding box in the chart below.
NOTE: Leave any unused switch locations blank.
Write the DIP switch 10-digit sequence: ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
2. Enter program mode:
*
(Master Code) #. A long tone will sound.
3. Set Linear Multi-Code frequency and encryption: Press 03 # 4 #. A long tone will sound.
4. Enter the DIP Switch sequence (Use ONLY 1 and 0). Press #. A long tone will sound.
5. Exit Program Mode:
*
*
#.
6. Press the Learn Button on the operator.
7. Within 30 seconds - Enter a valid 4-digit PIN then press #. A long tone will sound.
NOTE: When entering the DIP Switch sequence 3 beeps will sound if an incorrect number of entries is input.
Once an operator has been programmed, enter a valid 4-digit PIN and the # key to activate the operator.
DIP Switch Sequence 1 2 345678910
UP / ON (CLOSED)
DOWN / OFF (OPEN)
PROGRAM TO OPERATOR
Programming Step Keystroke Combination Indicator
1. Enter program mode
*
(Master Code)
#
Long tone
2. Set Temporary PIN 05 # (New temporary 4-digit PIN) # (New temporary
4-digit PIN) # Number of uses (9 maximum) #
Long tone
3. Exit Program Mode
* *
#
Keypad backlight will turn off
Programming Step Keystroke Combination Indicator
1. Enter program mode
*
(Master Code)
#
Long tone
2. Delete PIN 07 # (4-digit PIN to be deleted) # (4-digit PIN to be
deleted) #
Long tone
3. Exit Program Mode
* *
#
Keypad backlight will turn off
Loading ...
Loading ...
Loading ...