Loading ...
2
INSTALLATION
1. Choose a mounting location suitable for your application such as a wall, flat surface, or a pedestal with a 3" x 3" mounting
pattern (LiftMaster gooseneck pedestal post models PED42 or PED64). Locate the keypad at least 6 feet (1.8 m) away
from any moving part of the gate and where the user cannot reach over, under, around or through the gate to operate the
controls. The mounting location needs to be in line of sight of the moving gate.
2. Unlock and remove the faceplate from the mounting plate.
3. Mount the mounting plate to the desired surface and secure with 1/4" screws or bolts (not provided).
4. Remove the battery cover using a Phillips screw driver. Install the battery (provided) and re-install inner cover.
5. Reattach the faceplate to the mounting plate and lock with the key.
To prevent possible SERIOUS INJURY or DEATH from a moving gate or door:
• User activation controls MUST be located at least 6 feet (1.8 m) away from ANY moving part of the gate and where the
user cannot reach over, under, around or through the gate to operate the controls.
• ALWAYS keep remote controls out of reach of children. NEVER permit children to operate or play with remote controls.
• Activate gate or door ONLY when it can be seen clearly, is properly adjusted, and there are no obstructions to door travel.
• ALWAYS keep gate or door in sight until completely closed. NEVER permit anyone to cross path of moving gate or door.
Battery
Mounting plate
Faceplate
Battery Cover
WARNING: This product can expose you to chemicals including lead, which are known to the State of California to
cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Loading ...
Loading ...
Loading ...