Loading ...
Loading ...
Loading ...
@
Small
Element
Fig. 1
o ® @
Small Large
Element OFF Element
hi hi
6 6
4 !4
o_ Right
Front
Fig. 3
Large
Element
Fig. 4
o e @
Small Large
Element OFF Element
hi hi
6 [
4 4
2
,%%. ..=
slm "a ®'*" sire
Io Io
o_) Right
Front
Fig. 6
Dual Radiant Elements (all models)
The cooktop is equipped with one or more dual radiant surface
elements. Symbols on the control panel (See Fig. 4) are used
to indicate which coil of the dual radiant element will heat. The
symbol shown in Fig. 1 indicates that only the inner coil will
heat. The symbol shown in Fig. 4 indicates that both inner and
outer coils will heat. You may switch from either coil setting at
any time during cooking.
To Operate the Dual Element(s):
1. Place correctly sized cookware on the dual surface
element.
2. Push in and turn the control knob counterclockwise (See
Fig. 2) for smaller cookware or clockwise (See Fig. 5) for
larger cookware.
3. Turn (do not push) the knob to adjust the setting if needed.
Start most cooking operations on a higher setting and then
turn to a lower setting to finish cooking. Each surface
element provides a constant amount of heat at each
setting. A glowing red surface heating area extending
beyond the bottom edge of the cookware indicates the
cookware is too small for the surface heating area.
4. When cooking has completed, turn the surface control
knob to OFF before removing the cookware.
Note: The HE message will appear after turning the control
knob to OFF if the cooktop is still hot and will remain on
until the radiant heating surface area has cooled
sufficiently. Note: See page 8, Fig. 5 for recommended
control settings.
Radiant surface elements may appear to have
cooled after they have been turned off. The glass surface may
still be hot and burns may occur if the glass surface is
touched before it has cooled sufficiently.
Loading ...
Loading ...
Loading ...