Loading ...
Loading ...
Loading ...
o ®
Front Bridge
Element OFF Element
hi hi
6 6
4 4
2
slm "o _"" sire
Io Io
Front
Fig. 1
o ®
Front Bridge
Element OFF Element
hi hi
4 4
%%, ,""
slm "® e'*" Sire
Io Io
Front
Fig. 3
To Operate the Bridge Element (some models):
1. Place correctly sized cookware on the Bridge surface
element.
2. Push in and turn the control knob counterclockwise
(Figs. 1 & 2) to heat the portion of the Bridge element
for normal shaped cookware or clockwise for larger or
rectangular shaped cookware (Figs. 3 & 4).
3. Turn (do not push) the knob to adjust the setting if
needed. Start most cooking operations on a higher
setting and then turn to a lower setting to finish cooking.
Each surface element provides a constant amount of
heat at each setting. A glowing red surface heating area
extending beyond the bottom edge of the cookware
indicates the cookware is too small. Please note that
not all cookware will fit the Bridge element correctly.
4. When cooking has completed, turn the surface control
knob to OFF before removing the cookware. The HE
message will appear in the display after turning the
control knob to OFF if the cooktop is still hot and will
remain on until the radiant heating surface area has
cooled sufficiently. Note: See page 8, Fig. 1 for
recommended control settings.
NOTE: The BRIDGE element may also be used in
combination with the left rear single element. Because
these elements have 2 different controls, one element
can be used to cook while the other element may be
used to keep food warm (See Fig. 5).
Fig. 5
11
Loading ...
Loading ...
Loading ...