Loading ...
Loading ...
Loading ...
21
Fine
Filter
Spray
Arm
Retaining
Posts
Ultra-Fine
Filter
CARE AND CLEANING
FILTERS
Inspect and clean the filters periodically. This should be done every other month or more depending on usage. If there is
a decrease in wash performance or dishes feel gritty, this is also an indication the filters need to be cleaned.
Ultra-Fine Filter Assembly
To clean the Ultra-Fine Filter assembly, remove the bottom
rack. Twist the Ultra-Fine Filter assembly counterclockwise
and lift to remove for cleaning. Rinse filter with warm soapy
water and use a sponge to carefully remove any stubborn
particles.
For models with a 2-piece Ultra-Fine Filter assembly with
an additional Filter Basket for food particles, twist the Filter
Basket in the counterclockwise direction to unlock it from
the Ultra-Fine Filter assembly. See directional arrows on
the bottom of the Filter Basket. Pull the Filter Basket to
remove from the assembly, throw away any food particles,
rinse with warm soapy water, and use a sponge to remove
any stubborn particles.
Once cleaned, replace Filter Basket back into the
Ultra-Fine Filter assembly and twist it clockwise to lock into
place.
Fine Filter
To clean the Fine Filter (mesh plate), remove the bottom rack.
Remove the Ultra-Fine Filter.
Twist each of the two retaining posts located toward the back
bottom of the tub counterclockwise, and remove the Fine Filter.
Rinse filter with warm soapy water. Scouring pads or brushes
can scratch the filter surface but a soft brush or sponge may be
needed to remove stubborn soils or calcium deposits caused
by hard water. Once cleaned, replace the Fine Filter and the
Ultra-Fine Filter. Twist the two retaining posts clockwise to
lock in place.
The retaining posts can be a choke hazard for small children if removed from the dishwasher.
Keep out of reach of children.
WARNING
2-piece - Ultra-fine Filter assembly with additional
Filter Basket (on some models)
PROTECT AGAINST FREEZING
If your dishwasher is left in an unheated place during the
winter, ask a service technician to:
1
Turn off electrical power to the dishwasher. Remove
fuses or trip circuit breaker.
2
Turn off the water supply and disconnect the water inlet
line from the water valve.
3
Drain water from the water inlet line and water valve.
(Use a pan to catch the water.)
4
Reconnect the water inlet line to the water valve.
49-4000215 Rev. 3
Loading ...
Loading ...
Loading ...