Loading ...
Loading ...
Loading ...
SANTOS : Instruction and maintenance manual
98168 EN 1.3 - 05 2017 5 / 22 www.santos.fr
11. Do not use the appliance if the power supply cord is damaged. It must be replaced
by either a SANTOS approved dealer or a person with similar qualifications to avoid
any danger.
12. Never connect several appliances to the same power socket.
13. Never use the appliance outdoors.
14. Never place the appliance close to or on a source of heat.
15. This appliance is a professional machine designed exclusively for professional use.
It is not designed for household use.
16. This appliance is not designed for use by people (including children) whose
physical, sensorial or mental capacities are impaired or by people with no
experience or knowledge, unless they have been supervised or given training in the
use of the appliance beforehand by a person responsible for their safety.
Supervise children to ensure they do not play with the appliance.
ELECTRICAL CONNECTION:
The appliance is available in with a choice of two voltages for the power supply
• 220-240V 50/60 Hz single phase
• 100V 50 Hz - 120V 60 Hz single phase
Line protection: the appliance should be connected to a standard 2-pole + earth electric
socket. The installation should be fitted with an RCD and a fuse rated at
16A. The appliance must be earthed
An equipotentiality terminal provided to maintain various parts of an installation at
the same potential is available under the appliance.
CARE:
• Before connecting the machine, check that the mains electrical voltage is the
same as the voltage for your appliance. Its value is shown:
either on the identification plate under or behind the machine.
or on the identification plate on the last page of this manual.
• If the power cable (10) is damaged, it should be replaced by a SANTOS approved
dealer, SANTOS or a person with similar qualifications to avoid any danger.
• The plug must remain easily accessible while the appliance is in use.
USING FOR THE 1st TIME:
1. Remove the plunger (3).
2. Model # 28: Rotate the clamping handle (1) by one half turn to release the cover
(2), Fig.2.
Model # 68: Rotate the clamping handle (1) by one quarter turn to release the
cover (2), Fig.2.
3. To be able to remove the cover, turn then lift the cover (2), Fig.3
!
Loading ...
Loading ...
Loading ...