Loading ...
Loading ...
Loading ...
NOTE: If the cables have become dis-
connected, connect cables as shown in
Figure 7.
Traction Drive Cable Auger Drive Cable
SNOW CHUTE ASSEMBLY
1. Turn crank assembly counterclock-
wise until it stop.
2. Position snow chute on inside of
snow chute flange and align the
three holes in the snow chute with
holes on snow chute flange. (See
Figure 8)
3. Place three 5/16-18 carriage bolts
from inside of chute as shown in
Figure 8. (hardware is found in
parts bag).
4. Place three 5/16-18 flatwashers
and three 5/16-18 nuts on outside
of flange.
5. Tighten all four carriage bolts se-
curely.
NOTE: DO NOT overtighten carriage
bolts.
Figure 7
6. Turn crank assembly clockwise and
make sure all carriage bolts are
tight.
Carriage
Bolts
Snow Chute
Nut
/
__ Flatwasher
_ _ Flange
Figure 8
HOW TO INSTALL
THE SPEED SELECT KNOB
Install the speed select knob to the
speed select lever. See Figure 9. On
some models the speed select knob is
attached.
_ Speed Select
Knob
! i _ Speed Select
, , Lever
Figure 9
F-031027L 9
Loading ...
Loading ...
Loading ...