Loading ...
Loading ...
Loading ...
Fig. 6.9
Fig. 6.10
16
4. Run a straight edge along the front of the AGA Total
Control / Dual Control plinth, to ensure the front face of
both plinths sit squarely against the straight edge
(see Fig. 6.9).
When satisīed both plinths sit squarely, jacking screws can
be tightened until they just make contact with the AGA Total
Control / Dual Control plinth, and locking screws can now be
tightened.
DESN 516551
DESN 516553
5. Front jointing bracket can now be hooked into place
over the two pot magnets. This will latch the two plinths
together (see Fig. 6.10).
Loading ...
Loading ...
Loading ...