Loading ...
Loading ...
Loading ...
Weekly
:DWHUWDQN:DWHU¿OWHURI:DWHUGLVSHQVHU
Removing
Pull up the Water tank with both hands and tilt it slightly towards you.
Attaching
Insert the tip of the valve into the hole. Place both left and
right edges of the Water tank in the locked position.
Push the Water tank all the way down until it reaches the end point.
Remark
Ɣ
When removing the Water tank for cleaning, if the rubber seal is
inserted reversely due to friction with the faucet, use your hand to
push the seal reversely to its original position.
Ɣ The valve in the Water tank can be removed by turning it
counterclockwise.
5HSODFH¿OWHU
1 Open the lid at the right corner using a hand.
2 Lift the filter straight out of the lock.
Replace with a new hygiene filter. Put the filter back to its original
position and close the lid tightly.
Notices
Ɣ
7KHK\JLHQH¿OWHUVKRXOGEHUHSODFHGHYHU\\HDUVRUZKHQDSSURSULDWH
Ɣ7KHK\JLHQH¿OWHUFDQEHSXUFKDVHGDWDOODXWKRUL]HGVHUYLFHFHQWHU
Once every 3 months
Ice tray
The Ice tray can be cleaned by using the Auto Ice Clean function (Page 21). In addition,
the Ice tray can be removed and cleaned manually.
How to clean the Ice tray manually.
Remove and clean the Ice tray
1
Choose the Auto Ice Off mode (Page 21).
2 Turn the knob on the Auto Ice maker to the unlocked position.
3 Pull the protruding side forward to remove the Ice tray.
4
Clean it with water. (Do not use sharp scouring pads to scrub
the surface of Ice tray. If the Ice tray is scratched, ice may not
be properly released, leading to a malfunction.)
Remark
Ɣ The Ice tray and its frame cannot be separated.
Ɣ Do not clean with dishwashers or dish drying rack.
Attaching
1 Push the Ice tray in until you hear a “click”.
2 Turn the knob into the locked position. Ice cannot be made if the Ice tray is not locked.
3 Disable the Auto Ice Off mode (Page 21) to restart the Auto Ice makings.
Remark
Ɣ
Ice will not be made until the Auto Ice Off mode is turned off.
Ɣ Do not pour water directly into the Ice tray after manual cleaning.
(That may cause ice cubes sticking together or a malfunction.)
Knob
Lock position
Lock position
Unlock position
Unlock position
Protrusion
Cleaning filter Cleaning
filter element
31
Loading ...
Loading ...
Loading ...