Loading ...
Loading ...
Loading ...
6
Loading ...
Loading ...
Loading ...
- Your new tumble dryer
- Display rules
- Contentsen Installation and operating instructions
- 8 Intended use 4
- ( Safety instructions 4
- 7 Environmental protection 12
- 5 Installation and connection 13
- Y The main points in brief 18
- * Getting to know your appliance 19
- Z Laundry 22
- / Programmes and buttons 23
- 1 Operating the appliance 26
- M Signal setting 32
- > Noises 33
- D Cleaning 34
- 3 Faults and what to do about them 36
- J After-sales service 38
- [ Consumption values 39
- J Technical data 40
- 8 Intended use
- Intended use
- â This appliance is intended for private domestic use only.
- â Do not install or operate this appliance anywhere that is liable to experience frost and/or outdoor conditions. There is a risk that the appliance will be damaged if residual water in it freezes. If hoses freeze up, they may crack/burst.
- â This appliance must only be used for drying and freshening up domestic laundry, consisting of items that have been washed with water and are suitable for tumble drying (see label on item). Using the appliance for any other purpose is outside of t...
- â This appliance is intended for use up to a maximum height of 4000 metres above sea level.
- ( Safety instructions
- Safety instructions
- Children/people/pets
- â The appliance may be used by children over the age of 8 years and by persons with reduced physical, sensory or mental capacity or by persons with a lack of experience or knowledge as long as they are supervised or have received instruction on how...
- â Children must not play with this appliance.
- â Do not allow children to clean or maintain this appliance unsupervised.
- â Keep children under 3 years and pets away from this appliance.
- â Do not leave the appliance unattended when children or other people who are unable to assess the risks are in the vicinity.
- â Do not position the appliance behind a door, as this may obstruct the appliance door or prevent it from opening completely.
- â Once an appliance has reached the end of its life, pull the mains plug from the socket before severing the mains cable, and then destroy the lock on the appliance door.
- â The mains voltage on your power socket matches the rated voltage specified on the appliance (identification plate). The connected loads and the required fuse protection are specified on the identification plate.
- â The appliance is only connected to a source of alternating current via a nationally recognized and grounded outlet that has been correctly installed.
- â The mains plug and the grounded socket match and the earthing system has been correctly installed.
- â The cross section of the cable is sufficiently large enough.
- â The mains plug is accessible at all times.
- â If using a residual current circuit breaker, only use one that bears the following mark: z. The presence of this mark is the only way to be sure that it fulfils all the applicable regulations.
- â Rinse the laundry thoroughly with warm water and detergent before drying it in the machine.
- â Do not place laundry in this appliance to be dried if the laundry has not been washed first.
- â Do not use the appliance if industrial chemicals have been used to clean the laundry.
- â During the last part of the drying cycle, the laundry in the drum is not heated (cooling cycle). This is to ensure that it remains at a temperature at which it will not be damaged.
- â Do not switch off the appliance before the drying cycle has finished unless you remove all items of laundry from the drum immediately and spread them out (to dissipate the heat).
- â If the amount of laundry in the appliance exceeds its maximum load capacity, it may not be able to operate properly, or this may result in material damage or damage to the appliance.
- â If you operate the appliance without a fluff filter, or if the fluff filter is defective, this may result in damage to the appliance.
- â Light objects such as hair and lint may be sucked into the air inlet when the appliance is in operation.
- â Foam and foam rubber may deform or melt if dried in the appliance.
- â If you pour the wrong quantity of detergent or cleaning agent into the appliance, this may result in material damage or damage to the appliance.
- â If the appliance overheats, it may not be able to operate properly, or this may result in material damage or damage to the appliance.
- â Switch off the appliance. Disconnect the appliance from the power supply (pull out the plug).
- â Never take hold of the mains plug with wet hands.
- â When removing the mains plug from the socket, always take hold of the plug itself and never the mains cable, otherwise this may damage the mains cable.
- â Do not make any technical modifications to the appliance or its features.
- â Repairs and any other work on the appliance must only be conducted by our customer service or by an electrician. The same applies for replacing the mains cable (when necessary).
- â Spare mains cables can be ordered from our customer service.
- â Do not allow these agents to come into contact with the surfaces of the appliance.
- â Clean the appliance with nothing but water and a soft, damp cloth.
- â Remove any detergent, spray or other residues immediately.
- 7 Environmental protection
- Environmental protection
- Packaging/old appliance
- Coolant
- Energy-saving tips
- â Spin the laundry before drying. The drier the laundry, the shorter the drying time will be, thus consuming less energy.
- â Load the dryer with the maximum load.
- â Ventilate the room and keep the air inlet on the dryer free to ensure air exchange.
- â Clean the fluff filter after each drying cycle. If the fluff filter is dirty, the drying time is prolonged and energy consumption is increased.
- â Energy saving mode: If the dryer is not operated for a prolonged period, it automatically switches off before the program starts and when the program has ended to save energy. The display panel and indicator lamps go off after a few minutes and t...
- 5 Installation and connection
- Installation and connection
- Scope of delivery
- â Dryer
- â Installation and operating instructions
- â Basket for woollens
- â Condensation drain*
- â As the dryer is heavy, you could injure yourself by trying to lift it. Do not lift the dryer on your own.
- â You could cut your hands on the sharp edges of the dryer. Do not hold the dryer by the sharp edges.
- â Protruding parts on the dryer may break off when it is lifted or pushed. Do not move the dryer by holding on to protruding parts.
- â Check the dryer for damage caused during transportation. Never operate a dryer if it is damaged.
- â Any residual water in the dryer may freeze and damage the dryer. Do not install the dryer in rooms that are at risk of frost.
- â The dryer is placed on a clean, level and firm surface,
- â The mains plug can be accessed at all times,
- â The air inlet on the dryer is kept clear and there is sufficient ventilation,
- â The area around the dryer is kept clean and
- â The dryer is levelled using the threaded feet.
- Proceed as follows to change the condensation drain:
- 2. When the dryer is delivered from the factory, the hose for discharging the condensation into the condensation container is fastened to the connecting piece.
- 3. Disconnect the hose from the connecting piece and put it in the "parked" position.
- 4. Take the drain hose from the accessories and secure it to the free connecting piece.
- 5. Fasten the other end of the drain hose with the remaining accessories, depending on the connection situation (A, B or C).
- Caution!
- Accumulated water can be drawn back into the dryer and may cause material damage.
- Check that the water drains away from the wash basin quickly. The drain must not be sealed or blocked.
- Secure the drain hose so that it cannot slip out.Do not kink the drain hose. Ensure that a height difference of max. 100 cm and min. 80 cm between the installation surface and the drain is maintained for drainage into a siphon.
- 6. Pull out the condensation container fully.
- 7. Turn the condensation container 180° onto its underside and remove the stopper that is fitted.Turn the condensation container back over and insert the stopper into the recess in the top of the condensation container.
- 8. Pull the filter out of the lock-in slot and place it into the recess in the top of the condensation container.
- 9. Slide in the condensation container until it clicks into place.
- 2. Select any programme using the programme selector.
- 3. Press the Start button.
- 4. Wait for 5 minutes.
- 5. Empty the condensate container again.
- 6. Switch off the dryer.
- Y The main points in brief
- * Getting to know your appliance
- Z Laundry
- Laundry
- Preparing the laundry
- â Tie cloth belts, apron strings, etc. together or use a laundry bag.
- â Close zips, hooks and eyelets and buttons. Button up large items of laundry, such as covers.
- â Remove any metal objects, such as paper clips, from pockets.
- â To ensure a consistent drying result, sort laundry by fabric type and drying programme.
- â Always dry very small items of laundry, e.g. babies' socks, together with large items such as towels.
- â Knitted fabrics such as T-shirts and jerseys often shrink the first time they are tumble-dried. Use a gentle programme.
- â Do not overdry easy-care laundry. This increases creasing of the laundry.
- â Use timed programmes for single garments.
- â Some detergents and care products, e.g. starch or softeners, contain particles which may be deposited on the moisture sensor. This may impair the sensor function and in consequence the drying result.
- Do not tumble-dry the following fabrics:
- / Programmes and buttons
- 1 Operating the appliance
- Operating the appliance
- Loading laundry and switching on the dryer
- The dryer must be correctly positioned and connected, ~ Page 13.
- 2. Turn the programme selector to any programme to switch the dryer on.
- 3. Close the dryer door.
- 2. Lean the basket for woollens against the upper notch.
- 3. Place the required fabric in the insert of the basket for woollens
- 4. Place the insert or the sports shoes in the basket for woollens.
- 5. Use the programme selector to select the programme for the basket for woollens or a time programme.
- 6. Set the drying time.
- 7. Start the programme.
- 8. Remove the fabrics and switch off the dryer.
- 2. Use the programme selector to set the required programme. The default programme settings for the selected programme appear in the display panel.
- 3. If required, adjust the default programme settings. You can find detailed information on this from ~ Page 23 onwards.
- Starting the programme
- If you want to lock the programme to prevent it from being adjusted inadvertently, you can select the childproof lock, see ~ Page 25.
- When a programme is selected, the expected drying time for the recommended load is displayed. During drying moisture sensors detect the remaining moisture in the load and adjust the programme length (except timed programmes). This is visible via the ...
- 2. Add or remove laundry.
- 3. Select another programme or an additional function, if required.
- 4. Close the dryer door.
- 5. Press the Start button.
- 2. Turn the programme selector to the "off" position.
- 2. Pull out the two-part fluff filter.
- 3. Remove the fluff from the recess in the fluff filter.
- 4. Pull apart the two-part fluff filter.
- 5. Open both filters and remove all the fluff.
- 6. Rinse away the fluff under warm, running water.
- 7. Dry the fluff filter, close it and reinsert the two-part fluff filter.
- 2. Pour out the condensation water.
- 3. Push in the condensate container until you feel it lock back into place in the dryer.
- M Signal setting
- Signal setting
- â The spin speed that is used for spinning your laundry before it is dried,
- â The volume of the audible signal at the end of the programme,
- â The volume of the audible button signals.
- Activating setting mode
- 1. Switch the dryer on.
- 2. Select the "Cottons" programme in position 1 and wait for five seconds.
- 2. The spin speed is shown in the display.
- 3. Press the "Ready in" time button or the drying time button to change the spin speed.
- 4. Turn the programme selector clockwise to position 3.
- 5. The volume of the audible signal at the end of the programme is shown in the display.
- 6. Press the "Ready in" time button or the drying time button to change the volume.
- 7. Turn the programme selector clockwise to position 4.
- 8. The volume for the audible button signal is shown in the display.
- 9. Press the "Ready in" time button or the drying time button to change the volume.
- > Noises
- D Cleaning
- Cleaning
- Cleaning the dryer and the control panel
- Cleaning the moisture sensor
- The dryer is equipped with a stainless-steel moisture sensor. The moisture sensor measures how damp the laundry is.
- After long periods of usage the moisture sensor may become covered by a fine layer of limescale or residues of detergents and care products. Such residues must be removed regularly as the sensor function and in consequence the drying result may be im...
- The filter in the condensate container cleans the condensation water that is used during the dryer's automatic cleaning cycle.
- 2. Pour out the condensation water.
- 3. Remove the filter.
- 4. Clean the filter under warm, running water or in the dishwasher.
- 5. Push in the filter until you feel it lock into place.
- 6. Push in the condensate container until you feel it lock into place.
- 3 Faults and what to do about them
- J After-sales service
- [ Consumption values
- Consumption values
- Consumption values table
- Programme
- 8 kg
- 4 kg
- 8 kg
- 4 kg
- 1400 rpm
- 179 min
- 111 min
- 1.57 kWh
- 0.93 kWh
- 1000 rpm
- 203 min
- 122 min
- 1.80 kWh
- 1.04 kWh
- 800 rpm
- 227 min
- 143 min
- 2.04 kWh
- 1.25 kWh
- 1400 rpm
- 125 min
- 75 min
- 1.10 kWh
- 0.66 kWh
- 1000 rpm
- 150 min
- 90 min
- 1.36 kWh
- 0.82 kWh
- 800 rpm
- 176 min
- 106 min
- 1.64 kWh
- 0.98 kWh
- 3.5 kg
- 3.5 kg
- 800 rpm
- 55 min
- 0.51 kWh
- 600 rpm
- 71 min
- 0.66 kWh
- Most efficient programme for cotton fabrics
- The following "standard cottons programme" (identified with ü) is suitable for drying normal, wet cotton laundry and is most efficient in terms of its combined energy consumption for drying wet cotton laundry.
- J Technical data