Loading ...
Loading ...
Loading ...
en Installation and connection
14
■ The dryer is levelled using the
threaded feet.
Note: Check the alignment of the
appliance with a spirit level and
correct if necessary. Change the
height by turning the appliance feet.
All appliance feet must stand firmly
on the ground.
Incorrect alignment may cause high
noise levels, vibrations and improper
movement of the drum.
Note: If in doubt, have the appliance
connected by a specialist.
Changing the condensation
drain
Notes
■ The condensation from the dryer can
either be discharged into the
condensation container or drained
off via a connection to the waste-
water system. By default, the
condensation from the dryer is
discharged into the condensation
container.
■ If the condensation drain is installed,
residual water remains in the
condensation container due to the
dryer's self-cleaning function.
Proceed as follows to change the
condensation drain:
1. Remove the accessories from the
dryer drum.
2. When the dryer is delivered from the
factory, the hose for discharging the
condensation into the condensation
container is fastened to the
connecting piece.
3. Disconnect the hose from the
connecting piece and put it in the
"parked" position.
4. Take the drain hose from the
accessories and secure it to the free
connecting piece.
Loading ...
Loading ...
Loading ...