Loading ...
Loading ...
Loading ...
Problem solving guide
37
Problem Cause and remedy
The compressor is
switching on more fre-
quently and for longer
periods of time. The
temperature in the ap-
pliance is too low.
The ventilation gaps have been covered or become
too dusty.
Do not block the ventilation gaps.
Dust the ventilation gaps regularly.
The appliance door has been opened too frequently,
or a large amount of fresh food has been placed in
the appliance for freezing at the same time.
Only open the door when necessary and for as
short a time as possible.
The required temperature will re-establish itself after
a while.
The appliance door is not properly closed. A thick
layer of ice may have formed in the freezer.
Close the appliance door.
The required temperature will re-establish itself after
a while.
If a thick layer of ice has formed, it will reduce effi-
ciency and increase the energy consumption.
Defrost the appliance and clean it.
The ambient room temperature is too high. The
higher the room temperature, the longer the com-
pressor will run for.
See “Installation - Location”.
The compressor is
switching on more fre-
quently and for longer
periods of time, so the
temperature in the ap-
pliance is dropping.
The temperature setting is too low.
Adjust the temperature.
The Super freeze function is still switched on.
You can switch off the Super freeze function earlier
to save energy.
Loading ...
Loading ...
Loading ...