Loading ...
Loading ...
Loading ...
Switching on and off
17
Before using for the first time
Packaging material
Remove all packaging material from
the inside of the appliance.
Cleaning
Please refer to the relevant instruc-
tions in “Cleaning and care”.
Clean the inside of the appliance and
the accessories.
Switching the refrigeration ap-
pliance on
To enable the temperature to get suffi-
ciently cold inside the refrigeration ap-
pliance, allow the appliance to run for
approx. 2hours before placing food in
it.
Do not place food in the freezer zone
until it has reached the required cold-
ness (at least -18°C).
The compressor can take up to
8minutes to switch on due to a built-
in switch delay. This delay is designed
to increase the service life of the com-
pressor.
Press the On/Off button.
The refrigeration appliance will start
cooling. The temperature display and
the alarm symbol will flash until the
freezer zone is cold enough to use.
Switching off
Press the On/Off button until the dis-
play goes out.
The cooling system switches off. If this
does not happen, the lock is on (see
"Selecting further settings - To deactiv-
ate the lock).
Switching off for longer peri-
ods of time
If, during a long absence, the refri-
geration appliance is switched off
but not cleaned and the door(s) left
shut, there is a risk of mould forming
inside the appliance.
It is essential to clean the refrigera-
tion appliance.
If the refrigeration appliance is not go-
ing to be used for a longer period of
time, observe the following:
Switch the refrigeration appliance off.
Switch off at the wall socket and
withdraw the plug from the socket, or
disconnect the fuse.
Defrost the freezer.
Clean the refrigeration appliance and
leave the door ajar to air the appli-
ance and avoid odours building up in-
side.
Loading ...
Loading ...
Loading ...