Loading ...
Loading ...
Loading ...
WARHIHG
NEVERpull starter cord without first relieving spray gun
pressure.
When starting engine, pull cord slowly until resistance is felt
and then pull rapidly to avoid kickback.
After eachstarting attempt, where engine fails to run, always
point gun in safe direction and squeezespray gun trigger to
release high pressure. Engagespray gun trigger lock.
Firmly grasp spray gun with both hands when using high
pressure spray to avoid injury when gun kicks back.
WARHIHG
DO NOTtouch hot parts and AVOID hot exhaust gases.
Allow equipment to cool before touching.
Keep at least 5 ft. (152 cm) clearance on all sides of pressure
washer including overhead.
Codeof Federal Regulation (CFR)Title 36 Parks, Forests, and
Public Property require equipment powered by an internal
combustion engine to have a spark arrester, maintained in
effective working order, complying to USDAForest service
standard 5100-1C or later revision. In the State of California a
spark arrester is required under section 4442 of the California
Public resources code. Other states may havesimilar laws.
WARHIHG
DO NOT allow CHILDRENto operate pressure washer.
NEVERrepair high pressure hose. Replace it.
NEVERrepair leaking connections with sealant of any kind.
Replaceo-ring or seal.
NEVERconnect high pressure hose to nozzleextension.
Keep high pressure hose connected to pump and spray gun
while system is pressurized.
ALWAYS point gun in safe direction and squeezespray gun
trigger, to releasehigh pressure, every time you stop engine.
Engagetrigger lock when not in use.
NEVERaim spray gun at people, animals or plants.
DO NOT secure spray gun in open position.
DO NOT leave spray gun unattendedwhile machine is running.
NEVERuse a spray gun which does not havea trigger lock or
trigger guard in place and in working order.
Always be certain spray gun, nozzlesand accessories are
correctly attached.
WARHIHG
WHENADJUSTINGOR MAKING REPAIRSTO YOUR PRESSURE
WASHER
o Disconnect the spark plug wire from the spark plug and place
the wire where it cannot contact spark plug.
WHENTESTINGFOR ENGINESPARK
Useapproved spark plug tester.
DO NOT check for spark with spark plug removed.
Loading ...
Loading ...
Loading ...