Loading ...
Loading ...
Loading ...
2.2 Organisational measures
2.1 Intended use
Basic safety instructions
2 Basic safety instructions
6
The product has been constructed using state-of-the-art
technology and in line with the recognised technical
safety regulations. However, use of this product may
still result in the risk of injury or death to the user or
third parties, or of damage to the product and other
material assets.
Only use the product in technically perfect working
order, for its intended use and with safety and hazards
in mind, in compliance with the operating and instal-
lation instructions. In particular, you must immediately
rectify faults that could impair safety or have such
faults rectied immediately by a third party.
The product is exclusively intended to be installed
on the machines approved by the manufacturer and is
intended for the accessories approved by the manufac-
turer. Any other or additional form of use, for example
use in conjunction with self-constructed accessories,
shall be regarded as non-compliant with the intended
use. The manufacturer/supplier shall not be held liable
for any damage or loss suffered as a result. The risk is
borne solely by the user.
When operating implements, the mower must be
switched off.
Do not mow on slopes with a gradient of more than
10° (17%).
Please note that no slopes are entirely safe. Driving on
slopes requires you to pay particular attention in order
to prevent the machine from overturning.
Intended use also includes complying with the oper-
ating and installation instructions and adhering to the
inspection and maintenance conditions.
The operating and installation instructions must always
be kept ready at the location where the machine is used.
In addition to the operating and installation instruc-
tions, observe and follow the generally valid legal reg-
ulations and any other binding regulations for accident
prevention and environmental protection.
Such obligations may also include handling hazard-
ous substances or making available/wearing personal
protective equipment and complying with road trafc
regulations, for example.
Supplement the operating and installation instructions
by instructions as well as site management and report-
ing obligations concerning special operational require-
ments, for example with regard to work organisation,
workows, personnel used, etc.
Any personnel instructed to perform work on the ma-
chine must have read the operating instructions before
starting work, specically the section entitled "Safety
instructions". Reading the instructions after work has
begun is too late. This applies in particular to person-
nel who only work on the machine occasionally, for
example for set-up and maintenance.
At least occasionally, check that the personnel are
working with safety and hazards in mind while fol-
lowing the operating instructions.
Personnel must not have long hair which is not tied
back or wear loose clothing or jewellery including
rings. There is a risk of injury from being caught or
drawn into the machine, for example.
Wear personal protective equipment if necessary or
required by regulations.
Observe all safety and hazard notices on the machine.
Ensure that all safety and hazard notices at/on the
machine can be read in full at all times.
In the event of any modication to the machine or any
change in the machine's performance that may affect
safety, shut down the machine immediately and report
the fault to the responsible specialist dealer.
Do not modify, convert or attach equipment to the
machine without approval from the manufacturer if
this could impair safety. This also applies to tting and
adjusting safety equipment and valves, as well as for
welding on supporting parts.
Use only genuine spare parts from the manufacturer.
These comply with the technical requirements and
safeguard your warranty and guarantee rights. Adhere
to the prescribed time periods or those indicated in the
operating and installation instructions for recurring
tests/inspections.
Workshop equipment which is appropriate for the work
is mandatory for carrying out maintenance measures.
Make personnel aware of the location of re extin-
guishers and how to use them.
Comply with the re alarm and reghting procedures.
Loading ...
Loading ...
Loading ...