Loading ...
Loading ...
Loading ...
Problem solving guide
150
Problem Cause and remedy
A humming sound can
be heard after switching
on the appliance, during
operation and after
switching off the appli-
ance.
It is quite normal and does not indicate any fault
with the appliance. It happens when water is being
pumped through the system.
After moving house, the
steam oven no longer
switches from the heat-
ing-up phase to the
cooking phase.
The boiling temperature of the water has changed as
the altitude of the new location for the appliance dif-
fers from the old one by at least 300m.
To adjust the boiling temperature, you need to de-
scale the steam oven (see “Cleaning and care –
Descaling the steam oven”).
During operation an un-
usually large amount of
steam escapes, or
steam escapes from
parts of the oven where
it does not usually.
The door is not properly closed.
Close the door.
The door seal is not correctly fitted.
Press it in all the way round the door to make sure
it is fitted evenly.
The door seal is damaged, e.g. cracks can be seen.
The door seal needs to be replaced.
Call Miele Service.
Do not use any microwave modes / functions until
the door seal has been replaced.
A whistling sound is
heard when the appli-
ance is switched on
again.
When the door is closed, the pressure has to equal-
ise, which can cause a whistling sound. This is not
a fault.
The Start at and Finish at
functions are not avail-
able.
The temperature in the oven compartment is too
high, e.g. after a programme has finished.
Open the door and let the oven compartment
cool down.
These functions are not generally available in main-
tenance programmes.
Loading ...
Loading ...
Loading ...