Loading ...
Loading ...
Loading ...
Installation Instructions
Cutout for Double Built-In Oven
JunCtion Box Cabinet Width 27"
Location
Allow 7/8" for
ovedap of oven
over side edges
of cutout _
2" x 4" or
equivalent
runners level
with bottom
of cutout
Cutout
Width
25" Min.
25 114" Max
20-j
/
Allow s minimum of 20"
for clearance to adjacent
oorners, drawers, walls,
etc. when door is open Allow 1 _
minimum for
ovedxp of oven
top and bottom
of cutout
Cabinet Recommended
Width Minimum
27- Cutout Location
from Floor
Cutout Depth
Cutout Width
44"
Above
base rail
Alternate Cutout Cutout Height
junctionbox Height _-
49 11116" Min.
location
50 118"Max.
5"
Recommended
minimum cutout location
from floor 131/4"
13 1/4"
23 5/8" Min.
25" Min.
25 1/4" Max.
49 11/16" Min.
50 1/8" Max,
NOTE: If the cabinet does not
have a front frame and the
sides are less than 314"thick,
shim both sides equally to
establish the cutout width.
If the cabinet does not have a solid bottom,
two braces or runners must be installed
level with the bottom of the cutout to
support the weight of the oven. For double
ovens, the runners and braces must
support 275 Ibs.
NOTE: If marks, blemishes or the
cutout opening are visible above the
installed oven, it may be necessary to
add wood shims under the runners and
front trim until the marks or opening
are covered.
18" _-
Over Centedine
of Cabinet
2" X 4" or
equlvalsut
ruflnArs
level with
botom of
cutout
6
Loading ...
Loading ...
Loading ...