Loading ...
Loading ...
Loading ...
Installation Instructions
Cutout for Single Built-In Oven
Cabinet Cabinet Width 27"
Width Junction Box
27" Location
Recommended
Minimum
Cutout Location
from Floor 32 1/2"
Allow 7/8" for
overlap of oven
over side edges
2" x 4" or
equivalent
runners level
with bottom
of cutout
20-
Allow a minimum of 20"
for clearance to adjacent
comers, drawers, walls,
etc. when door is open
Allow 1"
minimum for
overlap of oven
top and bottom
of cutout
Cutout Depth 23 1/2" Min.
22" MIn.
above Cutout Width 25" Min.
Cutout base rail
25 1/4" Max.
JunCtion Box
I_ocetion
Recommended
minimum cutout loCation
from floor 32 1/2"
Cutout Height
27 5/8" Min.
28 1/8" Max.
il OTE: If the cabinet does not
have a front frame and the
sides are less than 3/4" thick,
shim both sides equally to
establish the cutout width.
T
If the cabinet does not have a solid bottom,
two braces or runners must be installed
level with the bottom of the cutout to
support the weight of the oven. For single
ovens, the runners and braces must
support 150 Ibs.
NOTE: If marks, blemishes or the
cutout opening are visible above the
installed oven, it may be necessary to
add wood shims under the runners and
front trim until the marks or opening
are covered.
]
24"
2" x 4" or equivalent
runners level with
bottom of cutout
J
27" --
This oven is not approved for
stackable or side by side installation.
5
Loading ...
Loading ...
Loading ...