Hotpoint WLW3300BCL washer

User Manual - Page 4

For WLW3300BCL.

PDF File Manual, 24 pages, Download pdf file

Loading ...
Loading ...
Loading ...
important Safety Instructio (continued)
Do not wash fiberglass articles in
your washer• Skin irritation could
result from the remaining particles
that maybe picked up by clothing
during subsequent washer use•
The laundry process can reduce
the flame retardancy of fabrics, To
avoid such a result, the garment
manufacturer's care instructions
should be followed very carefully•
Never climb on or stand on the
washer top•
For washer operation
Do not leave washer lid up
during cycle• This will stop the
wash and spin action and prevent
completion of the cycle•
SAY THESE STRUCTIONS
How to operate your clothes washer
WARNING-To reduce the risk of fire, electric shock, or injury to persons,
read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance.
I _ Heov v Duty J
Extra Large Capacity Washer
Sorting and Loading
Sort clothes carefully by fabric
type, weight, color and amount of
soil according to instructions on
page 5.
Load clothes into the wash
basket, being careful not to overload•
Clothes should be below the retaining
ring• See page 8 for more loading
information•
Add measured amount of
detergent• See pages 9 through
13 for information on detergents
and other laundry additives•
For information on bleaches and
fabric softeners, see page 13.
Close lid, washer will fill but not
agitate or spin with lid open•
Wash Water Temperature
Selection
For hot water wash, set cycle
selector to "HOT WASH"
(11 min•) or "10:'
For warm water wash, set cycle
selector to "WARM WASH"
(8 min.), "67 "4;' or "2"
For cold water wash, set cycle
selector for warm wash as explained
above and TURN OFF THE HOT
WATER FAUCET.
RINSE WATER TEMPERATURE
WILL ALWAYS BE COLD.
Pull Cycle Selector Knob out to
start the cycle•
If you wish to change cycle setting
after washer has started, push Cycle
Selector Knob into stop washer and
reset to the new position. Setting
can be changed at any time during
the cycle.
How to soak in your washer.
Allow the washer to fill and agitate
for a few minutes to dissolve the
soaking agent. Then push in the
Cycle Selector Knob to stop the
washer (keep lid closed) and allow
to soak for as long as desired• After
desired soak period, pull out the
Cycle Selector Knob to complete
the cycle.
Loading ...
Loading ...
Loading ...