Hotpoint WLW3300BCL washer

User Manual - Page 20

For WLW3300BCL.

PDF File Manual, 24 pages, Download pdf file

Loading ...
Loading ...
Loading ...
The Problem Solver (continued)
PROBLEM POSSIBLE CAUSE AND REMEDY
SNAGS, HOLES,
TEARS, RIPS OR
EXCESSIVE WEAR
(continued)
HEAVILY SOILED
AREAS such as
colt.s and cuffs
<
:WASHER WON'T
OPERATE
WATER
TEMPERATURE
IS _CORRECr
As Permanent Press garments age, they may show fraying at collars and cuffs This is
normal due to weakening of fibers by the Permanent Press process It is not caused by
washer Do not wash heavy items such as towels with Permanent Press Remove collar
stays, when possible
Roughness or burrs on agitator may cause rips or tears Check agitator and file rough
spots if necessary,
.Garments weakened by age, sun or atmosphere This is inevitable and is not caused
by washer,
Too large loads. Load washer only with number of items that will move freely.
Pretreat with liquid detergent
Make sure cord is plugged into outlet
Make sure both hot and cold faucets are turned on
Make sure controls are set and cycle selector knob is pulled out to ON position
Make sure lid is closed Washer will fill but will not spin or agitate with lid open
Check house fuses or circuit breakers If another appliance is sharing the electrical
outlet, remove it Washer should have separate outlet
Make sure temperature selector switches are correctly set,
Make sure hot and cold faucets are turned on and
regulated correctly Q,_/
Make sure hoses are connected to correct faucets
hot to hot, cold to cold
Water valve screens may be stopped up Remove inlet
hoses from water valve Clean the screens and reinstall hoses
Check household water heater to make sure it is delivering water at 140° to 150°E
2O
Loading ...
Loading ...
Loading ...