Loading ...
Loading ...
Loading ...
PROBLEM
WATER WON'T
DRAIN
WATER LEAKS
WASHER IS NOISY
WASHER PAUSES
IN CYCLE
POSSIBLE CAUSE AND REMEDY
• Make sure drain hose is not kinked.
• Top of drain outlet should be less than 8 ft• above floor.
• Make sure hose connections are tight at faucets.
• Make sure end of drain hose is correctly inserted in and secured to drain Ncility. _
• Make sure washer is level and firm to the floor with mbber f_t pads i_ p!_ and
front jam nuts tight•Seeyour Installation Instructions•
• A sharp distinctive sound will be heard at the end of each spin p¢fi_ _ motor
stops and the spin brake inside the transmission 1_ in'__s sound is normal:
• Heavily unbalanced loads can cause the washer to vibrate excessively _pin;
and may cause it to move from its original position. In extreme cases, (usually occu_
when washing a single, heavy item or a small load when water levd is set than
necessary) the spin basket may strike the outer tub, creating a lo_ but h _noi_
To correct, open the lid and redistribute the load evenly about Se wash b_ket; Glo_
the lid and restart.
• Washer normally pauses between washing steps.. -such as between ",,vaSR_ spin or
between spin and rinse.
,f you need more help., call, toll free:
The GE Answer Center"
800.626.2000
consumer information service
21
Loading ...
Loading ...
Loading ...