Loading ...
FULL ONEYEAR WARRANTY ON CRAFTSMAN DRILL PRESS
If within one year from the date of purchase, this Craftsman Drill Press fails due to a defect
in material or workmanship, Sears will repair it, free of charge.
WARRANTY SERVICE IS AVAILABLE BY SIMPLY CONTACTING THE NEAREST SEARS SER-
VICE CENTER/DEPARTMENT THROUGHOUT THE UNITED STATES.
This warranty applies only while this product is used in the United States.
This warranty gives you specific legal rights, and you may also have other rights which
vary from state to state.
SEARS, ROEBUCK AND CO., Dept. 698/731A, Sears Tower, Chicago, IL 60684
GENERAL SAFETY iNSTRUCTiONS FOR POWER TOOLS
1. KNOW YOUR POWER TOOL
Read and understand the owner's manual and
labels affixed to the tool. Learn its application and
limitations as well as the specific potential hazards
peculiar to this tool.
2. GROUND ALL TOOLS
Thistoolis equipped with an approved 3-conductor
cord and a 3-prong grounding type plug to fit the
proper grounding type receptacle. The green con-
ductor in the cord is the grounding wire. Never
connect the green wire to a live terminal.
3. KEEP GUARDS IN PLACE
In working order, and in proper adjustment and
alignment.
4. REMOVE ADJUSTING KEYS AND WRENCHES
Form a habit of checking to see that keys and
adjusting wrenches are removed from toot before
turning it on
5. KEEP WORK AREA CLEAN
Clutteredareasand benchesinviteaccidents. Floor
must not be slipperydue to wax or sawdust.
6. AVOID DANGEROUS ENVIRONMENT
Don't use power tools in damp or wet locationsor
787.1) at all times. Everyday eyeglasses are not
safety glasses. They only have impact resistant
lenses. Also. use face or dust mask if cutting oper-
ation is dusty, and ear protectors (plugs or muffs)
during extended periods of operation.
13. SECURE WORK
Use clamps or a vise to hold work when practical.
It frees both hands to operate tool,
14. DON'T OVERREACH
Keep proper footing and balance at all times.
15. MAINTAIN TOOLS WITH CARE
Keep tools sharp and clean for best and safest
performance. Followinstructionsfor lubricatingand
changing accessories.
16. DISCONNECT TOOLS
Before servicing; when changing accessories suc
as blades, bits, cutters, etc.
17. AVOID ACCIDENTAL STARTING
Make sure switch is in "OFF" position before plug-
ging in.
18. USE RECOMMENDED ACCESSORIES
Consult the owner's manual for recommended ac-
cessories. Followthe instructionsthat accompany
ihe accessories. The use of improper accessories
may cause hazards.
19. NEVER STAND ON TOOL OR ITS STAND
Serious injury could occur ifthe tool is tipped or if
the cutting tool is accidentally contacted, Do not
store materials above or near the tool such that it
7. KEEP CHILDREN AWAY
All visitors should be kept a safe distance from
work area.
8. MAKE WORKSHOP CHILD-PROOF
With padlocks, master switches, by removing star- is necessary to stand on the tool or its stand to
ter keys. or storing tools where children can't get reach them.
them. 20. CHECK DAMAGED PARTS
9. DON'T FORCE TOOL Before further use ofthe tool a guard or other part
It will do the job better and safer at the rate for
which it was designed.
10. USE RIGHTTOOL
Don't force tools or attachment to do a job it was
not designed for.
11, WEAR PROPER APPAREL
Do not wear loose clothing, gloves, neckties, or
jewelry (rings, wrist watches) to get caught in mov- 21,
ing parts. NDNSLIP footwear is recommended.
Wear protective hair covering to contain long hair,
Roll long sleeves above the elbow. 22.
12. USE SAFETYGOGGLES (HEAD PROTECTION)
Wear safety goggles (must comply with ANSI
that is damaged should be carefully checked to
ensure that itwill operate properly and perform its
intended function Check for alignment of moving
parts, binding or moving parts, breakage of parts,
mounting, and any other conditions th
its operation. A guard or other part tha
should be properly repaired or replac
DIRECTION OF FEED
Feed work into a blade or cutter agai
tion of rotation of the blade or cutter only.
NEVER LEAVETOOL RUNNING UNATTENDEC
Turn power off. Don't leave tool until it comes to a
cornplete stop.
Loading ...
Loading ...
Loading ...