Loading ...
Loading ...
Loading ...
Installation and planning notes
14 PW 811 / PW 814 / PW 818
Dispenser pump connections
Up to 12dispenser pumps can be connected to the washing ma-
chine.
Dispenser pump connections on the back of the machine
Connections1 and 2 are for viscous agents. These connectors are
sealed and need to be drilled out before connection with a
5/16" (8mm) drill bit.
Make sure that you only drill through the first panel(I) as there is a
deflecting panel(II) 3/8"(10mm) behind it.
Connections 3 to12 are for liquid dispensing. These connections are
sealed and must be cut to the diameter of the hose with a small saw.
If opened connections are no longer required, they must be resealed
using a suitable sealant (e.g. silicone).
Connection terminals for five time-controlled dispenser pumps, which
can be operated without a multifunction module, are located behind
the cover adjacent to the electrical connection.
Calibration of the dispenser pumps and regulation of dispensing
quantities is carried out automatically for washing machines fitted
with a multifunction module.
A flowmeter or throughput sensors can be connected for precise
monitoring of the dispensing quantity.
Connections for level monitoring are available for every agent dis-
pensed.
Loading ...
Loading ...
Loading ...