Artusi AWD845W 8kg / 4kg Washer Dryer Combo

OPERATION MANUAL - Page 50

For AWD845W.

PDF File Manual, 119 pages, Read Online | Download pdf file

AWD845W photo
Loading ...
Loading ...
Loading ...
48
The amount of detergent you will put in your machine will depend
on the following criteria:
Your detergent utilization will be based on the degree of contami-
nation of your laundries.
Do not prewash your less stained laundries and put the correct
amount of detergent in the 2nd compartment of the detergent dra-
wer.
The Pre-wash feature might be used for your very dirty laundry.
If you are going to do a pre-wash, place 1/4 of the detergent you
would normally put in the detergent compartment into the compart-
ment numbered 1, and put the remaining 3/4 to the compartment
numbered 2.
• Use detergents produced for automatic washing machine in your
machine. Adhere to the advice of detergent manufacturers while
determining the amount of detergent you should use with your la-
undry.
The higher the degree of hardness of the water the more deter-
gent you will use.
The amount of the detergent you will use will increase as the
amount of your laundry increases.
Put the softener in the softener compartment in the detergent
drawer. Do not exceed the MAX level. Otherwise, softener will flow
into washing water through flushing.
Softeners with high density are required to be thinned to a degree
before being put in the drawer. Because high-density softener will
clog the flush and block the flow of the softener.
• You can use your liquid detergent in all programs without pre-
wash. For this, plug the liquid detergent apparatus to second com-
partment of the detergent drawer (present in your machine) and
adjust the liquid detergent amount (use liquid detergent in the
amounts the detergent manufacturers foresee). Do not exceed the
part that is labeled Max, use only for liquid detergent, remove this
from its place during powder detergent use.)
For positioning detergent apparatus in the detergent box, see the
page 29.(*)
Choice of detergent and placing into the machine
(*)Model dependant
Loading ...
Loading ...
Loading ...