Loading ...
Loading ...
Loading ...
107
(*****) See page 27.
As soon as the
machine is loaded
with water, water
discharges.
No water
appears in the
drum during
washing.
Laundry has
detergent
residues on
them.
Laundry have
detergent
residues on
them.
Spinning
operation is not
performed or
runs late.
The end of the
water drain hose
is too low for the
machine.
No fault.
Water is in the
unseen part of the
drum.
Non-dissolving
particles of some
detergents may
adhere to your
laundries as white
spots.
The reason for
these spots may
be oil, cream or
ointment.
No fault.
Unbalanced load
control system has
been activated.
-
Perform an extra rinsing
by setting your machine
to “Rinsing” programme,
or clean the spots using a
brush after your laundry
dries.
Apply the maximum
amount of detergent
instructed by the detergent
manufacturer in the next
washing operation.
The unbalanced load
control system will try
to spread your laundry
evenly. The spinning
operation will begin after
your laundry is spread.
Place the laundry in the
machine in a balanced
fashion next time.
Set the water drain hose
to an appropriate height.
(*****)
FAULT POSSIBLE CAUSE REMOVING METHODS
Loading ...
Loading ...
Loading ...