Loading ...
September 2016
WARNINGS
• Do not touch any hot surfaces
• Do not immerse unit, cord or plug in liquid at any time
• Unplug cord from outlet when not in use and before cleaning
• Plug only into a 3-hole grounded electrical outlet of appropriate voltage
• Do not operate unattended
• Do not use this unit for anything other than intended use
• Do not use outdoors
• Always use on a fi rm, dry and level surface at least 12” from walls or any other obstruction
• Do not use if unit has a damaged cord or plug, in the event the appliance malfunctions, or has been damaged in any
manner
• Keep children and animals away from unit
• Any incorrect installation, alterations, adjustments and/or improper maintenance can lead to property loss and injury.
All repairs should be done by authorized professionals only or warranty will be void.
• Ensure that the designated power supply is adequate for continual usage
TO INSTALL
1. Remove all packing material and tape, as well as any protective plastic from the equipment.
2. Clean any glue residue left over from the plastic or tape.
3. Place the equipment on a fl at stable surface.
4. Plug the equipment into a properly grounded electrical supply matching the nameplate rating voltage.
Damage to the equipment can occur if incorrect power is supplied to equipment.
CONTROLS & OPERATIONS
Front Control Panel
1. PRESET TEMPERATURE - Sets the unit to preset temperatures when pressed
2. DISPLAY - Displays the temperature being set or in the well
3. C° TEMPERATURE LIGHT - When illuminated the display shows temperature in C°
4. F° TEMPERATURE LIGHT - When illuminated the display shows temperature in F°
5. SELECT/SET KNOB - Turn to adjust the temperature
6. CONTROLLER ON/OFF BUTTON - Switches the controller “ON” or “OFF” Front Control Panel
7. RESET BUTTON - Used to reset the unit if the water level drops below the element
Rear Control Panel
8. DATA TAG - Shows the unit information such as Model and Serial Number
9. POWER ON/OFF SWITCH - Switches the unit “ON” or “OFF”
10. PUMP SPEED SWITCH - Switches the pump speed between low and high
C
F
L
H
Reset
Program
Serial #
Model #
Front of Control Panel
Back of Control Panel
1
2
34
5
67
8
9
10
Loading ...
Loading ...
Loading ...