Loading ...
Loading ...
Loading ...
SEMI-PERMANENT INSTALLATION
If required, your appliance can also be
installed semi-permanently (Fig. E).
30 cm
12 inches
12 inches [_
Proceed as follows'.
o Drill a hole ® 5,25 inches (134 ram) in an
outside wall or through a window pane.
Respect the dimensions and height of the
hole given in figure Fand G.
o Fit the wall flange (10) into the hole.
Fit the air exhaust hose (11) in the rele-
vant housing located on the rear side of
the appliance. (fig. A page 5).
. Fit the end of the hose (11) to the wall
flange (10) as shown in fig. G.
_X 1O0cm
_ X 39 inches
cm
14 inches
%
When the hose (11) isnot connected, the dril-
led hole can be closed with the flange cap
(10).
NOTE: When installing the air conditioner
semi-permanently, you should leave a door
slightly open little as 1/2 " (1 cm) to guar-
antee correct ventilation and room pressure.
in the in the in the wall:
window wooden you are
pane kickboard recommended
of a to insulate the
French section of wall
window using suitable
insulation.
Keep the air hoses as short and free of
curves as possible to avoid constrictions.
"As special tools are required for installa-
tion, we suggest you have the applian-
ce installed by specialized personnel."
Loading ...
Loading ...
Loading ...