Loading ...
Loading ...
Loading ...
TECHNICAL SPECIFICATION
Power supply voltage
Max. absorbed power
during air conditioning
Refrigerant
Cooling capacity
see rating label
LIMIT CONDITIONS
Room temperature for
air conditioning 64 + 95°F (18° + 35°C)
_G
TO AVOID DAMAGE TO THE UNIT:
NEVER TRANSPORT OR TURN THE APPLIANCE UPSIDE DOWN OR ON ITSSIDE,
IF THIS OCCURS, WAIT 6 HOURS BEFORE TURNING THE APPLIANCE ON, 24
HOURS IS RECOMMENDED, After the unit has been on its side, oil needs to
return to the compressor to ensure proper function, Without allowing the
unit this time (6-24 hours) the unit may function for only a short time, and
then the compressor will break down from lack of oil,
ELECTRICALCONNECTION
This appliance is equipped with a 3 prong grounded plug. The plug must be connected into
an outlet that is properly installed and grounded in the accordance with all local codes
and ordinances. Do not modify the plug provided with the appliance. If it will not fit the
outlet, have a proper outlet installed by a qualified electrician or relocate the unit to a pro-
per outlet. If the household electrical supply does not meet the above specifications, or if
you are not sure your home has an effective electrical ground, have a qualified electrician
or your local electrical utility company check it and correct any problems.
SAFETY PLUG
The appliance isfitted with a safety plug to protect the power cable.
If power is cut off, unplug from the outlet and make sure the power cable is undamaged.
If the cable is damaged, call the service center immediately.
If power cuts off frequently and the power cable is undamaged, contact a qualified elec-
trician.
OPERATION OF THE SAFETY PLUG
If the safety device incorporated in the plug trips and cuts off the power supply, check
that the power cable and plug are not damaged.
If the power cable is undamaged, to restore operation press the "RESET"button.
Toverify correct operation of the plug, press the "TEST"button periodically and make sure
the appliance disconnects. If this is not the case, contact the service center.
To restore operation, press the "RESET"button.
16
Loading ...