Loading ...
Loading ...
Loading ...
SERVICE AND ADJUSTMENTS
• Pull out 10" of rope and catch rope in notch in the puttey.
• Carefully turn the pulley two complete turns clockwise,
keeping the rope against the notch to wind the spring.
° White holding the pulley ratchet, pull the excess rope
through the starter rope hole. While holding tension on
the rope, let rope slowly rewind intothe housing.
_ndUp Spring
Rewind for
Tension
• Reinstall fan housing by aligning the fan housing to the
chassis. Then while holding the fan housing against the
chassis, pull the rope handle "out "until you feel the fan
housing drop into place against the chassis. Slowly, let
the rope rewind into starter housing.
• Reinstall the 4 fan housing screws and tighten the 2
cylinder cover screws. Figure 44.
Figure 48
- 24 -
Loading ...
Loading ...
Loading ...