Loading ...
Loading ...
Loading ...
2. Attach other end of high pressure hose to high pressure
outlet on pump. Tighten by hand.
3. Beforeconnecting garden hose to water inlet, inspect
inlet screen (A).Cleanscreen ifit contains debris or have
it replacedif damaged. DO NOTrun pressure washer if
inlet screenis damaged or missing.
4. Run water through garden hose for 30 seconds to flush
it of debris. Turn off water.
IMPORTANT:DO NOTsiphon standing water for the water
supply. UseONLY cold water (less than 100°F).
5. Connect garden hose (not to exceed50 feet in length) to
water inlet. Tighten by hand.
NOTICE:Using a OneWay Valve (vacuum breaker or check
valve) at pump inlet can causepump or inlet connector
damage.
• ThereMUSTbeat leastten feetof unrestrictedgardenhose
betweenthe pressurewasherinletandanydevice,suchasa
vacuumbreakeror checkvalve.
• Damageto equipment resulting from failure to follow this
instruction will void warranty.
A, WARNING:Risk of eye injury.
Spray can splash back or propel objects.
• Always wear safety goggles when using this equipment or in
vicinity of where equipment is in use.
• Before starting the pressure washer, be sure you are wearing
adequatesafety goggles.
• NEVERsubstitute safety glasses for safety goggles.
6. Turn ONthe water, press red button (B) on the gun and
squeezethe trigger to purge the pump system of air and
impurities.
ChecklistBefore Starting Engine
Reviewthe unit to ensure you have performed all of the
following:
1. Besure to read Safety Rules and Operationsections
before using the pressure washer.
2. Makesure handleis in place and secure.
3. Checkthat oil has been added to proper level in engine
crankcase.
4. Add proper fuel to fuel tank.
5. Checkfor proper hose connections (high pressure and
water supply) and that there are no kinks, cuts, or
damageto the high pressure hose.
6. Provide proper water supply (not to exceed100%).
Loading ...
Loading ...
Loading ...