Craftsman 580752190 Pressure Washer

Operator's Manual - Page 10

For 580752190. Also, The document are for others Craftsman models: 580.752190

PDF File Manual, 52 pages, Read Online | Download pdf file

580752190 photo
Loading ...
Loading ...
Loading ...
HOWTOUSEYOURPRESSUREWASHER
If you have any problems operating your pressure washer,
please call the pressure washer helpline at 1-888-222-3136.
PressureWasherLocation
Prsssur8 Washsr CJ88ranc8
A. WARNING: Exhaust heat/gases can ignite
combustibles, structures or damagefuel tank
causing a fire.
* Keepat least5 ft. (152 cm) clearanceon all sides of pressure
washer including overhead.
Place pressure washer outdoors in an area that will not
accumulate deadly exhaust gas. DO NOT place pressure
washer where exhaust gas (A) could accumulate and enter
inside or be drawn into a potentially occupied building.
Ensure exhaust gas is kept away from any windows, doors,
ventilation intakes, or other openings that can allow exhaust
gas to collect in aconfined area. Prevailing winds and air
currents should be taken into consideration when positioning
}ressure washer.
A. WARNIN6: Running engine gives off carbon monoxide,
an odorless, colorless, poisonous gas.
_ Breathing can cause headache,
carbon monoxide
fatigue, dizziness,vomiting, confusion, seizures,
nausea,fainting or death.
OperatepressurewasherONLYoutdoors.
Keepexhaustgasfrom enteringa confinedareathrough
windows,doors,ventilationintakes,or otheropenings.
DONOTstartor runengineindoorsor in anenclosedarea,
evenif windowsanddoorsareopen.
To Start YourPressureWasher
To start your engine-powered pressurewasher for the first
time, follow these instructions step-by-step. This information
also applies whenever you start the engine after you have let
the pressure washer sit idle for at leasta day.
1. Place pressurewasher outside near an water source
capableof supplying water at a flow rate greater than
3.3 gallons per minute and no less than 20 PSi at
pressurewasher end of garden hose.
2. Checkthat high pressure hose is tightly connected to
spray gun and pump. SeeAssembly for illustrations.
3. Makesure unit is in a level position.
4. Connectgarden hose to water inlet on pressure washer
pump.
flOTICE: DO NOT run the pump without the water supply
connected and turned on.
Damageto equipmentresultingfrom failureto followthis
instructionwill voidwarranty.
.
.
Turn ONthe water, press red button on the gun and
squeezethe trigger to purge the pump system of air and
impurities.
Attach spray tip extension to spray gun. Tighten by
hand.
.
.
Choosespray tip you want to use and insert it into spray
tip extension. See How to Use Spray Tips.
Move throttle lever to "Fast" position (B), shown as a
rabbit.
10
Loading ...
Loading ...
Loading ...