Craftsman 917272065 lawn tractor

User Manual - Page 32

For 917272065.

PDF File Manual, 64 pages, Download pdf file

Loading ...
Loading ...
Loading ...
TROUBLESHOOTINGCHART
CAUSE CORRECTIONPROBLEM
Poor grass
discharge
HeadUght(s) not
working
(Ifso equipped)
Battery will not
charge
Loss of drive
1. Engine speed too slow.
2. Travel speed toofast.
3. Wet grass.
4. Mower deck not level.
5. Low/uneven tire air pressure.
6. Wom, bent or loose blade.
7. Buildupof grass, leaves and
trash under mower.
8. Mower ddve belt worn.
g. Blades improperly installed.
10.Improper blades used.
11. Clogged mower deck vent
holes from buildup of
grass, leaves, and trash
around mandrels.
1. Switch is"OFF".
2. Bulb(s) or lamp(s) burned out.
3. Faulty light switch.
4. Loose or damaged widng.
5. Blown fuse.
1. Bad battery cell(s).
2. Poor cable connections.
3. Faulty regulator
(if so equipped).
4. Faulty altemator.
1. Freewheel control in
=disengaged" position,
2. Motion drive belt worn,
damaged, or broken.
3. Air trapped in transmission
dudng shipment or
servicing.
1. Place throttle o0ntml in
=FAST" position.
2. Shift to slower speed.
3. Allow grass todry before
mowing.
4. Level mower deck.
5. Check tires for proper air
pressure.
6. Replace/sharpen blade.
Tighten blade bolt.
7. Clean underside of mower
housing.
8. Replace mower ddve belt.
9. Reinstall blades sharp edge
down.
10.Replace with blades listed
in this manual.
11.Clean around mandrels to
open vent holes.
1. Turn switch"ON".
2. Replace bulb(s) or lamp(s).
3. Check/replace light switch.
4. Check widng and connec-
tions.
5. Replace fuse.
1. Replace battery.
2. Check/clean all connec-
tions.
3. Replace regulator.
4. Replace alternator.
1. Place freewheel control in
"engaged" position.
2. Replace motion ddve belt.
3. Purge transmission.
Englne"baddlrss" 1. Engine throttlecontrol not 1. Move throttlecontrol to
when turning setat =SLOW" =SLOW" position and allow
engine positionfor 30 seconds to idle for 30 seconds before
"OFF" before stopping engine, stopping engine.
32
Loading ...
Loading ...
Loading ...