Loading ...
Loading ...
Loading ...
NOTES:
a. a. All presets (except Broil) are set
with a time and temperature for
Steam mode. To select a preset,
press the icon of the desired
preset and the steam air fryer
will set to time and temperature
of that preset. You can also
adjust the time of the selected
preset by using the “ “ and
“ “ arrows. See page 8 for
reference on cooking presets.
b. b. If the water tank does not
have enough water or runs out
of water during the cooking
cycle, the “ADD WATER” icon
will illuminate on the panel
and the steam air fryer will
beep continuously. Press the
button and remove the water
tank to fill with water.
8. 8. If you need to turn the unit off
before the end of the cooking
cycle, hold down the button
for 3 seconds. The display will
read OFF and the fan may
continue to run up to 20 seconds.
9. 9. Slide the basket out of the steam
air fryer and place it on a pot
holder.
10. 10. To remove the ingredients, use
silicone tipped tongs, or carefully
pour ingredients out of the basket
onto a plate.
14
STEAM MODE
1. 1. Fill up the water tank with water.
The water tank’s capacity is 4.5
cups and it is recommended to fill
the water tank to its full capacity.
2. 2. Insert the water tank and
basket into the steam air fryer
completely. The (POWER)
button should illuminate on the
control panel.
3. 3. Insert the water tray into the
bottom of the steam air fryer.
4. 4. Press the button to turn on
the steam air fryer. The steam
air fryer will be in default mode.
Press the (MODE) button
to switch to Steam mode. The
STEAM icon will illuminate.
5. 5. Adjust the time needed using the
“ “ or “ “ arrows. Time can be
adjusted in 1-minute increments
between 1-60 minutes. Hold
down the “ “ or “ “ arrows to
move through time quicker.
NOTE: The temperature for
Steam mode is set at 212°F and
cannot be adjusted.
6. 6. Once you have set the time
or selected a cooking preset
(optional), press the button
to start the cooking cycle. The fan
icon will illuminate to indicate that
the steam air fryer is heating.
7. 7. If you would like to make changes
at any time during the cooking
cycle, such as adding more time
or changing to a new preset,
press the button, make your
adjustments, and press the
button to resume.
SET UP AND USING YOUR STEAM AIR FRYER
Loading ...
Loading ...
Loading ...