HFS1000 User Manual

Loading ...

HFS1000 NoN-coNtact iNfrared thermometer

Measuring object temperature

• PresstheStartbutton or Mode button briey.

> The device switches on. After two seconds, the display shows that the device is ready for use.

> The device always starts in body temperature mode.

• Press the Mode button briey.

> The device switches to the object temperature measuring mode.

> If the object temperature measuring mode is selected, press the MEM button to save it.

• Checkthemeasurementreadystatusin[Figure1].

• Hold the thermometer 2 to 3 cm from the desired measuring point.

• PresstheStartbutton

briey.

> Keep the distance until you hear the measurment completion beep.

> If the thermometer is in silent mode, keep the distance for approximately 2 seconds.

Loading ...

User Manual - Page 21