Shinco SDL-30P 30 Pint Dehumidifier

User Manual - Page 11

For SDL-30P.

PDF File Manual, 14 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
10
CARE AND MAINTENANCE
Always shut off the unit and unplug from the mains before cleaning or performing any
maintenance. When it is not in use for long periods,it is advisable to remove the plug from the
power socket. Do not use chemical solvents (such as benzene, alcohol or gasoline) as they may
cause irreversible damage to the unit.
1. CLEAN THE GRILLE AND CASE
Use water and a mild detergent to clean the washable filter frame. Do not use
bleach or abrasives. Do not splash water directly onto the main
unit,because it may cause an electric shock and can lead to the insulation
to deteriorate, or cause the unit to rust. The air intake and outlet grilles
get soiled easily, so use a vacuum attachment or soft brush to clean. Wipe
the dehumidifier body with a soft damp cloth or kitchen towel.
Remove the filter frame. If the optional activated carbon filter is fitted, remove them from the
frame and hoover gently approximately every 2-3 weeks.
If the mesh filter is dirty,pls hoover it, if it is heavily soiled,wash it with warm soapy water and dry
thoroughly before reinserting it in the unit.
When filter cleaning is finished and filters are dry, place them back into the unit.
NOTE: While the activated carbon filter is optional,so never run the unit without the filter frame
correctly inserted.
2. CLEAN THE WATER TANK
Every few weeks, clean the tank to prevent growth of mold, mildew and bacteria. Partially fill the
tank with clean water and add a little mild detergent. Swish it around and then empty the tank and
rinse.
NOTE: Do
not use a dishwasher to clean the tank. After cleaning and drying, the tank must be
reinserted securely into
dehumidifier in order to restart operation.
END OF SEASON MAINTENANCE
1. Press the CLEAN BUTTON and leave the unit for at least 30 minutes to internally dry.
2. Empty and clean the water tank, ensuring it is fully dry before reinserting into the unit.
3. Clean the unit and the filters as per cleaning procedure above.
4. Coil the power cord on the special cord storage rest at the back of the unit.
5. Cover the unit and keep it in a
dry place.
Loading ...
Loading ...
Loading ...